26 W, 50 W Emergency Light Conversion Kit, 218 x 105 x 44 mm

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

LED 3 Hours Emergency Kit

The Knightsbridge EMKIT is a universal emergency pack. This LED kit can convert most constant current LED luminaires to 3 hours emergency lights. LED kit 18-50W for maintained and non-maintained use.

LED 3 hours emergency kit
For use with all Constant Current driven DC LED
36V – 50W maximum
Suitable for maintained and non-maintained operation
Pre wired for quick installation
Adaptor leads included

Conversion Kits

Charger/inverter modules for converting fluorescent luminaires into emergency lighting units.,The module and battery packs fit inside most modern fluorescent batten fittings. For luminaires that have limited internal dimensions or that have internal temperatures above 50°C, remote mounting boxes are also available. The remote box is also suitable for converting double luminaires into emergency units, however only 1 tube will operate under emergency conditions. Two live supplies are required for standard operation, one switched, one unswitched. Failure of the unswitched supply operates the changeover circuit bringing on the battery supply. A red LED is supplied with the module for fitting into either the luminaire or remote box, to indicate a healthy battery charging state. The nickel-cadmium battery packs are protected against deep discharge.

Specificaties
Kenmerk Waarde
Wattage 26 W, 50 W
22 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
114,35
(excl. BTW)
138,36
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 114,35
Related Products
Emergi-Lite emergency conversion kits are available for 4-pin ...
Description:
Emergi-Lite emergency conversion kits are available for 4-pin fluorescent lamps operating with switch start or high frequency control gear.These conversion kits comprise a set of inverter/charger module, charge monitor LED, specialist battery and end caps. Remote kits comprise the parts ...
Properties may vary with different LED types. Designed ...
Description:
Properties may vary with different LED types. Designed for High Power Lambertian LED sources High light collection efficiency of >85% Precision moulded in optical grade Polycarbonate for thermal stability and system durability Part of the Polymer Optics “Modular LED Optics”® ...
The PowerLED lineo, 5m LED kit is a ...
Description:
The PowerLED lineo, 5m LED kit is a 24VDC, 2700K colour temperature. It is specifically designed to illuminate architectural areas with a cool white ambience, offering a 320lm (lumen output) performance. This 5W per meter commercial LED is manufactured a ...
LIN-5700-KIT-RS is a 24Vdc, 5700K Commercial LED, specifically ...
Description:
LIN-5700-KIT-RS is a 24Vdc, 5700K Commercial LED, specifically designed to illuminate architectural areas with a cool white ambience, offering a 320lm (lumen output) performance. This 5W per metre commercial LED is manufactured with a UV Stable encapsulant which offers high ...