TE Connectivity 10EEA2 Powerline Filter 39.1mm Length,, 10 A, 250 V ac

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: MX
Productomschrijving

Corcom EEA & EEB Series EMI Power Inlet Filter

The EEA & EEB Series are a new generation of compact RFI filters with IEC socket. A new design in both the internal structure and manufacturing process make this new series cost-effective and compact. The EEA Series supersedes the EF Series by providing superior performance, particularly in the common mode at low frequencies. Mechanically, its sompact size makes it compatible with similar filters in the market.

All Corcom filters have been designed and tested for susceptibility and/or emissions applications and have received approval from major safety agencies throughout the world including UL, CSA and VDE.

EEA Series

Compact single stage EMI filter with IEC 60320-1 C14 inlet
Two element circuit provides basic attenuation
Same performance as the EF Series
Available in three terminal configurations
Supersedes EF Series

EEB Series

Compact EMI filter with IEC 60320-1 C14 inlet
Two element circuit provides extended attenuation
Extended differential mode performance
Available in three terminal configurations

Specificaties
Kenmerk Waarde
Accessory Type RFI Filter
Voltage Range 250 V ac
Current Rating 10 A
Electrical Phase 1
Length 39.1mm
Width 50.3mm
Depth 20.6mm
Dimensions 39.1 x 50.3 x 20.6 mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 11-12-2019, met een levertijd van 2 à 3 werkdagen.
Prijs Each
12,24
(excl. BTW)
14,81
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
€ 12,24
25 - 49
€ 10,84
50 - 99
€ 10,01
100 - 199
€ 9,46
200 +
€ 8,98
Related Products
Surface or flush mountConnects directly to programmable drives ...
Description:
Surface or flush mountConnects directly to programmable drives (ST5-Si, stock no. 455-845 and ST10-Si, stock no. 455-863) using standard programming cablePower supplied direct from driveEasy to program using SiTM Programmer software4 line, 20 character/line LCDNEMA 4//12 rating (dustproof and drip-proof ...
L' bracket - required to secure the remote ...
Description:
L' bracket - required to secure the remote controller, alternatively din rail can be used.Side support - required to secure actuator base to work surface, two in a pack.Floating bracket - can be fitted to the external guide to give ...
This unit provides a continuous output power rating ...
Description:
This unit provides a continuous output power rating up to 60W, with precise servo control of dc servo motors. It operates from a single rail supply which enables battery operation if required. A MOSFET based linear output stage provides a ...
Motor side nut used to secure motor side ...
Description:
Motor side nut used to secure motor side foot to cylinderRod side nut used to secure rod side foot to cylinderMounting band & switch holder to hold reed sensor in positionSuitable sensors are D-M9PL and D-M9NL in the pneumatics cylinder ...