TE Connectivity 10VV1 Powerline Filter, 10 A, 250 V ac

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Corcom V & W Series Multipurpose Power Line RFI Filter for Emission Control

Corcom filters are recognized worldwide for providing EMI/RFI filtering solutions. TE offers over 70 Corcom filter series that are suitable for a wide range of applications across multiple industries. All Corcom filters have been designed and tested for susceptibility and/or emissions applications and have received approval from major safety agencies throughout the world including UL, CSA and VDE.

Both types are effective in controlling emissions in equipment using SCR and T2L circuits for compliance with FCC Part 15, Subpart J and EN55022, Level A, down to 150kHz

Offers an N = 3 (“T”) Line to Ground impedance to common mode and an N = 5 “Dbl. Pi”) impedance for Line to Line differential mode interference
Designed for susceptibility use when equipment impedance at RF frequencies is low

V Series

Offers an N = 4 (“Dbl. L”) Line to Ground impedance for common mode and an N=5 (“Dbl.Pi”) impedance for Line to Line differential mode interference
Designed for use when equipment impedance at RF frequencies is high
Two stage construction provides excellent suppression at high frequencies

W Series

Approvals

UL, CSA and VDE

Specificaties
Kenmerk Waarde
Accessory Type Filter
Voltage Range 250 V ac
Current Rating 10 A
Electrical Phase 1
Length 98mm
Width 52.8mm
Depth 38.9mm
Dimensions 98 x 52.8 x 38.9 mm
14 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
27,77
(excl. BTW)
33,60
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
€ 27,77
25 - 49
€ 26,10
50 - 99
€ 24,80
100 - 199
€ 23,55
200 +
€ 22,38
Related Products
This unit provides a continuous output power rating ...
Description:
This unit provides a continuous output power rating up to 60W, with precise servo control of dc servo motors. It operates from a single rail supply which enables battery operation if required. A MOSFET based linear output stage provides a ...
Versatile LCD operator interface keypads for use with ...
Description:
Versatile LCD operator interface keypads for use with PowerFlex 70 AC drives. Available in IP66 panel mount and IP20 drive mount variants. A panel bezel kit is also available for the drive mount version. Easy to read displaysSMART Start - ...
The ESCON 36/2 DC Controller can be used ...
Description:
The ESCON 36/2 DC Controller can be used to control brushed motors up to 72WSensors comprise of a Digital Incremental Encoder (2 channel with or without Line Driver) & DC TachoThree operating modes including current controller (torque control), speed controller ...
The Matrix series MAX-3 channel controller (BCU control ...
Description:
The Matrix series MAX-3 channel controller (BCU control unit) can accommodate up to three SKF 24 V dc linear actuators. The Controller features a built-in power supply and incorporates microprocessor technology. It also offers three motor outputs (DIN8) for actuators, ...