Enclosure Heater, 20W, 230 V ac, 70 x 65 x 67mm

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

HVR Pentagon Anti-Condensation Heaters

HVR Pentagon anti-condensation heaters have been designed for use where a low wattage heater is required to prevent condensation. They comprise a vitreous enamelled resistor mounted in a sheet steel case and have a removable perforated sheet steel cover. There is a cable entry grommet at each end and M4 terminal screws are provided on the resistor. Applications include switch and control gear cubicles.

Vitreous enamelled resistor mounted in a sheet steel case.
Removable perforated sheet steel cover.

Note

The recommended power rating required is 10W per square metre of enclosing surface, excluding the base. They should be mounted on a back surface with the heating element horizontal and the terminals at the bottom.

//media.rs-online.com/t_line/L603328-02.gif
Specificaties
Kenmerk Waarde
Output Power 20W
Input Power Rating 20W
Supply Voltage 230 V ac
Surface Temperature 45°C
Depth 67mm
Height 70mm
Width 65mm
1 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
161 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
24,63
(excl. BTW)
29,80
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 24,63
10 - 24
€ 23,80
25 - 49
€ 22,54
50 - 99
€ 20,88
100 +
€ 18,77
Related Products
Introducing the Compact convection heater of temperature classes ...
Description:
Introducing the Compact convection heater of temperature classes T3, T4 and T5 for use in areas with explosion hazard for prevention of formation of condensation and temperature fluctuations. Also benefitting in protection against frost in control and switch cabinets, and ...
Heaters specifically intended for anti-condensation and frost protection ...
Description:
Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware. Enclosed heater with 0-60°C thermostatic control and LED status indicatorSelf regulating PCT heating elementsThermal cut-outClass II insulation.
Heaters specifically intended for anti-condensation and frost protection ...
Description:
Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware. High power to size ratio - 3 power settingsLightweight and easy to fitHarness length 240mmElectrical Protection Class IIIndependent ...
Prevent formation of condensation and provide an evenly ...
Description:
Prevent formation of condensation and provide an evenly distributed interior air temperature in enclosures with electric/electronic components. Connected using internal terminal connectors. Small, compact design ideal for use where space is at a premiumPlastic casing according to UL-94-0, blackQuiet ...