Enclosure Heater, 100W, 230 V ac, 180 x 60 x 120mm

  • RS-stocknr. 144-7580
  • Fabrikantnummer 02042.0-10
  • Fabrikant STEGO
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FR
Productomschrijving

Stego Hazardous Area Compact Heaters, CREx 02 Series

Introducing the Compact convection heater of temperature classes T3, T4 and T5 for use in areas with explosion hazard for prevention of formation of condensation and temperature fluctuations. Also benefitting in protection against frost in control and switch cabinets, and in measuring equipment.

Features and Benefits

• For areas with explosion hazard
• Large convection surface
• Clip and screw flange fixing
• Ready-to-use with strain relief
• Maintenance free
• Temperature class T3 (200°C max) 50 W to 250 W
• Temperature class T4 (135°C max) 50 W to 200 W
• Temperature class T5 (100°C max) 50 W to 100 W

Stego Elektrotechnik Enclosure Heater

The Stego Elektrotechnik is a 100W enclosure heater belongs to CREx 020 series. This compact heater of temperature class T4 for use in areas with explosion hazard for prevention of formation of condensation and temperature fluctuations. It provides protection against frost in control and switch cabinets and in measuring equipment.

Features and Benefits

• Ambient temperature range between -60°C and 50°C
• Clip and screw flange fixing
• Compact in dimension 120 x 60 x 180mm
• For areas with explosion hazard
• Large convection surface
• Maintenance free
• Ready-to-use with strain relief

Applications

• Hazardous area

Certifications

• CE
• EAC approved
• EPS 16 ATEX 1 109 X
• Ex
• IEC
• IECEx
• IP66 rated

Specificaties
Kenmerk Waarde
Output Power 100W
Input Power Rating 100W
Supply Voltage 230 V ac
Surface Temperature +135°C
Depth 120mm
Height 180mm
Width 60mm
Series CREx 020
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 18-08-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
136,46
(excl. BTW)
165,12
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 136,46
Related Products
Heaters specifically intended for anti-condensation and frost protection ...
Description:
Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware. Enclosed heater with 0-60°C thermostatic control and LED status indicatorSelf regulating PCT heating elementsThermal cut-outClass II insulation.
'Self-regulating' PTC cabinet heater, offers a wide range ...
Description:
'Self-regulating' PTC cabinet heater, offers a wide range of power outputs from a single, compact footprint sizeCan be operated without the aid of a thermostat/overloadHeater operating voltage range 100-240Vac/dcType 3a DIN (EN50022) rail mounting with clip supplied (344-3646,344-3652, and 344-3674)Type ...
Heaters specifically intended for anti-condensation and frost protection ...
Description:
Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware. High power to size ratio - 3 power settingsLightweight and easy to fitHarness length 240mmElectrical Protection Class IIIndependent ...
Prevent formation of condensation and provide an evenly ...
Description:
Prevent formation of condensation and provide an evenly distributed interior air temperature in enclosures with electric/electronic components. Connected using internal terminal connectors. Small, compact design ideal for use where space is at a premiumPlastic casing according to UL-94-0, blackQuiet ...