Enclosure Heater, 150W, 230 V ac, 220 x 80 x 160mm

  • RS-stocknr. 144-7581
  • Fabrikantnummer 02043.0-10
  • Fabrikant STEGO
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FR
Productomschrijving

Stego Hazardous Area Compact Heaters, CREx 02 Series

Introducing the Compact convection heater of temperature classes T3, T4 and T5 for use in areas with explosion hazard for prevention of formation of condensation and temperature fluctuations. Also benefitting in protection against frost in control and switch cabinets, and in measuring equipment.

Features and Benefits

• For areas with explosion hazard
• Large convection surface
• Clip and screw flange fixing
• Ready-to-use with strain relief
• Maintenance free
• Temperature class T3 (200°C max) 50 W to 250 W
• Temperature class T4 (135°C max) 50 W to 200 W
• Temperature class T5 (100°C max) 50 W to 100 W

Stego Elektrotechnik Enclosure Heater

The Stego Elektrotechnik is a 150W enclosure heater belongs to CREx 020 series. This compact heater of temperature class T4 for use in areas with explosion hazard for prevention of formation of condensation and temperature fluctuations. It provides protection against frost in control and switch cabinets and in measuring equipment.

Features and Benefits

• Ambient temperature range between -60°C and 50°C
• Clip and screw flange fixing
• Compact in dimension 160 x 80 x 220mm
• For areas with explosion hazard
• Large convection surface
• Maintenance free
• Ready-to-use with strain relief

Applications

• Hazardous area

Certifications

• CE
• EAC approved
• EPS 16 ATEX 1 109 X
• Ex
• IEC
• IECEx
• IP66 rated

Specificaties
Kenmerk Waarde
Output Power 150W
Input Power Rating 150W
Supply Voltage 230 V ac
Surface Temperature +135°C
Depth 160mm
Height 220mm
Width 80mm
Series CREx 020
2 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
226,05
(excl. BTW)
273,52
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 226,05
Related Products
The Schneider Electric is an enclosure heater that ...
Description:
The Schneider Electric is an enclosure heater that belongs to the ClimaSys CR series. This is a compact resistant heater for prevention of formation of condensation due to low temperature. The mounting dimensions of this heater are 90mm depth, 60mm ...
Heaters specifically intended for anti-condensation and frost protection ...
Description:
Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware. Enclosed heater with 0-60°C thermostatic control and LED status indicatorSelf regulating PCT heating elementsThermal cut-outClass II insulation.
'Self-regulating' PTC cabinet heater, offers a wide range ...
Description:
'Self-regulating' PTC cabinet heater, offers a wide range of power outputs from a single, compact footprint sizeCan be operated without the aid of a thermostat/overloadHeater operating voltage range 100-240Vac/dcType 3a DIN (EN50022) rail mounting with clip supplied (344-3646,344-3652, and 344-3674)Type ...
Heaters specifically intended for anti-condensation and frost protection ...
Description:
Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware. High power to size ratio - 3 power settingsLightweight and easy to fitHarness length 240mmElectrical Protection Class IIIndependent ...