Enclosure Heater, 1200W, 230 V, 142 x 88 x 126mm

  • RS-stocknr. 829-9166
  • Fabrikantnummer PFH 1200 230V 17099910030
  • Fabrikant Pfannenberg
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Pfannenberg Compact Fan Heaters - PFH Series

The compact PFH series fan heater is ideal for use in electrical enclosure. They have an integrated fan that assist the natural convection and provides for fast and even distribution of the heat in the electrical enclosure.

high power to size ratio
small, compact design
wide range of heating capacities 200-1200 W in one housing
fast heating due to PTC technology
wall or DIN rail mounting
low surface temperature
finger guard at inlet and outlet

DIN Rail Mount Enclosure Heaters

Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware.

Specificaties
Kenmerk Waarde
Output Power 1200W
Air Flow 80m³/h
Input Power Rating 1215W
Supply Voltage 230 V
Surface Temperature +55°C
Depth 126mm
Height 142mm
Width 88mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 14-05-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
195,55
(excl. BTW)
236,62
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 195,55
5 - 11
€ 181,84
12 - 24
€ 172,07
25 - 49
€ 160,34
50 +
€ 146,62
Related Products
HVR Pentagon anti-condensation heaters have been designed for ...
Description:
HVR Pentagon anti-condensation heaters have been designed for use where a low wattage heater is required to prevent condensation. They comprise a vitreous enamelled resistor mounted in a sheet steel case and have a removable perforated sheet steel cover. There ...
Introducing the Compact convection heater of temperature classes ...
Description:
Introducing the Compact convection heater of temperature classes T3, T4 and T5 for use in areas with explosion hazard for prevention of formation of condensation and temperature fluctuations. Also benefitting in protection against frost in control and switch cabinets, and ...
Heaters specifically intended for anti-condensation and frost protection ...
Description:
Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware. Enclosed heater with 0-60°C thermostatic control and LED status indicatorSelf regulating PCT heating elementsThermal cut-outClass II insulation.
Prevent formation of condensation and provide an evenly ...
Description:
Prevent formation of condensation and provide an evenly distributed interior air temperature in enclosures with electric/electronic components. Connected using internal terminal connectors. Small, compact design ideal for use where space is at a premiumPlastic casing according to UL-94-0, blackQuiet ...