Enclosure Hygrostat, Adjustable, 40 → 90%RH, 230 V ac/dc, DIN Rail

  • RS-stocknr. 103-178
  • Fabrikantnummer FLZ600 17207000000
  • Fabrikant Pfannenberg
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Pfannenberg DIN Rail Mount Hygrostats - FLZ 600 Series

Pfannenberg FLZ 600 series DIN rail mount hygrostats activate control cabinet heaters or filterfans when a preset relative humidity is exceeded. The FLZ 600 series hygrostat unites thermostat and hygrostat in a single housing and at the same time monitors the relative humidity and temperature independent of each other.

DC max 30W
Differential gap approximately 5%
Tolerance for switching point ±4%, based on 50% rH
Polyamide band sensor
Connection 2-pole clamp 0.5-2.5mm2
Colour RAL 7035 - light grey
IP20 protection
Operating temperature 0°C to +60°C
Storage temperature -20°C to +80°C
Mounting method snap fastening for 35mm profile bars in accordance with EN 60715

Specificaties
Kenmerk Waarde
Adjustable or Preset Adjustable
Mount Type DIN Rail
Activation Humidity 40 → 90%RH
Supply Voltage 230 V ac/dc
Maximum Humidity Setting 90%RH
Minimum Humidity Setting 40%RH
Series FLZ600
29 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
183 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
57,36
(excl. BTW)
69,41
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 57,36
5 - 9
€ 54,49
10 - 24
€ 51,63
25 - 49
€ 48,75
50 +
€ 45,88
Related Products
The CNMB series of standard height DIN rail ...
Description:
The CNMB series of standard height DIN rail module boxes from CamdenBoss are an ideal enclosure for a wide range of electrical and electronic projects. Moulded in light grey flame retardant polycarbonate the enclosure has a snap fit modular design ...
These sense the relative humidity in an enclosure ...
Description:
These sense the relative humidity in an enclosure with electric/electronic components and turn on a heater at the set point, helping prevent the formation of condensation in the enclosure. The adjustment knob contains an LED which indicates when the connected ...
These sense the relative humidity in an enclosure ...
Description:
These sense the relative humidity in an enclosure with electric/electronic components and turn on a heater at the set point, helping prevent the formation of condensation in the enclosure. The adjustment knob contains an LED which indicates when the connected ...
EFL 012 Electronic Hygrostats will register the surrounding ...
Description:
EFL 012 Electronic Hygrostats will register the surrounding relative humidity and can switch a signal current using an internal relay. EFL 012 models can directly control signal processing devices. There is an LED integrated into the adjustment knob which shows ...