Stego Elektrotechnik, Enclosure Thermostat, Adjustable, NO, DIN Rail, 120 250 V ac

  • RS-stocknr. 697-4446
  • Fabrikantnummer 01141.0-00
  • Fabrikant STEGO
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Stego Compact DIN Rail Thermostats

KTO 011 (697-4437) thermostat normally closed, contact breaker for regulating heaters.,KTS 011 (697-4446) thermostat normally open, contact maker for regulating filter fans and heat exchangers or for switching signal devised when temperature limit has been exceeded.

Large setting range
Small size 60 x 33 x 43 mm
Plastic casing according to UL94 V-0, light grey
Variable fitting position and simple to mount (clip for 35mm DIN rail)
Maximum switching capacity: 250Vac, 10(2)A; 120Vac 15(2)A; Vdc 30W
Switch temperature difference 7K (±4K)
Thermostatic bimetal sensor element
Contact resistance <10mΩ
Service life >100,000 cycles
EMC according to EN 55014-1-2, EN 61000-3-2, EN 61000-3-3
Connection 2-pole terminal for 2.5mm2

,

clamping torque 0.8Nm
Operating/storage temperature -20 to +80°C/-45 to +80°C
IP20

Standards

VDE (697-4437 & 697-4446)
UL, VDE, CSA (121-7322 & 121-7323)

Approvals

VDE

Approvals

VDE

Specificaties
Kenmerk Waarde
Adjustable or Fixed Adjustable
Mount Type DIN Rail
Maximum Temperature Setting +60°C
Minimum Temperature Setting 0°C
Supply Voltage 120 250 V ac
Switch Configuration NO
Temperature Setting Range 0 +60°C
50 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
213 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
Was € 22,80
18,71
(excl. BTW)
22,64
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 18,71
10 - 24
€ 17,98
25 - 49
€ 16,90
50 - 99
€ 15,44
100 +
€ 13,61
Related Products
Heaters specifically intended for anti-condensation and frost protection ...
Description:
Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware. Snap-fastening onto 35 mm support rails EN 50 022 or direct screw-fastening onto the mounting platePTC technology with ...
This thermostat of temperature class T6 (85 °C ...
Description:
This thermostat of temperature class T6 (85 °C max.) is utilised for the regulation of heaters deployed in areas with explosion hazard. The high switching performance allows direct control of a heater. Compact, small mechanical thermostat offering a high response ...
Vigirex relays with associated toroid sensors measure the ...
Description:
Vigirex relays with associated toroid sensors measure the leakage current in an electrical installation to detect levels that may be damaging. Ideal for protection or alarming, the products offer multiple setting and mounting possibilities. For use on low-voltage AC installations ...
Maintaining constant temperatures in control panels and enclosures, ...
Description:
Maintaining constant temperatures in control panels and enclosures, the 7T panel thermostat suits the needs of both simple and sophisticated heating and ventilation systems with dedicated heating and ventilation versions. Helping to improve component reliability and preserve instrumentation accuracy through ...