Microchip MCP39F511-E/MQ Energy Meter IC, 10 bit, 28-Pin QFN

  • RS-stocknr. 893-8271
  • Fabrikantnummer MCP39F511-E/MQ
  • Fabrikant Microchip
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

MCP39F511 Energy Measurement ICs

The MCP39F511 from Microchip is an integrated, single-phase power monitoring device that provides real-time measurement of input power and energy values for AC/DC power supplies. On-board are two Delta-Sigma Analogue-to-Digital Converters (ADCs), a 16-bit Calculation Engine, EEPROM and a flexible 2-Wire Interface. An integrated low-drift voltage reference, combined with the 94.5 dB of SINAD performance on each measurement channel, allows for better than 0.1% accurate designs across a 4000:1 dynamic range.

Features

Power monitoring accuracy capable of 0.1% error across 4000:1 dynamic range
Built-in calculations using a 16-Bit processing core measuring:
- Active, reactive and apparent Power
- Active and reactive energy accumulation
- True RMS current, RMS voltage
- Line frequency, power factor
Dedicated Zero Crossing Detection (ZCD) pin
Dedicated PWM output pin
Automatic event pin control through fast voltage surge detection
Fast calibration routines
2-wire UART with 115.2k baud rate
512 bytes user-accessible EEPROM through page read/write commands
Non-volatile on-chip Memory
Low-Drift Internal Voltage Reference: 10 ppm/°C typical
Extended Temperature Range -40°C to +125°C

Energy/Power Measurement - Microchip

Specificaties
Kenmerk Waarde
Resolution 10 bit
Mounting Type Surface Mount
Package Type QFN
Pin Count 28
Dimensions 5 x 5 x 0.95mm
Length 5mm
Width 5mm
Height 0.95mm
Maximum Operating Supply Voltage 3.6 V
Maximum Operating Temperature +125 °C
Minimum Operating Supply Voltage 2.7 V
Minimum Operating Temperature -40 °C
175 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Pack of 5)
2,136
(excl. BTW)
2,585
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 5
€ 2,136
€ 10,68
10 - 20
€ 1,838
€ 9,19
25 - 95
€ 1,76
€ 8,80
100 +
€ 1,614
€ 8,07
*prijsindicatie
Verpakkingsopties
Related Products
The ATM90E36A is a high-performance energy metering device ...
Description:
The ATM90E36A is a high-performance energy metering device for three-phase four-wire (3P4W, Y0) or three-phase three-wire (3P3W, Y or Δ) systems. It is also applicable in Data Acquisition Terminal. With the measurement and Fourier analysis functions, the ATM90E36A can also ...
Using CMS-700 it is possible to measure and ...
Description:
Using CMS-700 it is possible to measure and calculate electrical parameters from both the mains and the branches, in order to provide the most comprehensive set of information on the system.A maximum of 3x32 sensors can be connected to the ...
ACM20 series AC power meters display the most ...
Description:
ACM20 series AC power meters display the most critical measurements in mains-powered equipment: voltage, amperage, active power (watts), and power factor.A front panel selector-switch provides two modes of operation: a fixed reading of any of the four parameters, or a ...
EMDX Range of multi function measuring meters from ...
Description:
EMDX Range of multi function measuring meters from Legrand, measures the main electrical quantities of a single phase or 3 phase network. Connection is done by measuring current transformers. The meters are suitable for DIN Rail, door and solid faceplate ...