Electrolube 10 ml White Syringe Epoxy Adhesive

  • RS-stocknr. 152-6878
  • Fabrikantnummer ERHTCX_ZF10S
  • Fabrikant Electrolube
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

TPM550 features high thermal conductivity of 5.5 W/m.K and becomes workable at approximately 45°C. The material’s advanced formulation ensures minimal contact thermal resistance. Like TPM350, TPM550 also produces no mess due to its thixotropic characteristics which prevent flow outside of defined interfaces. TPM550 can be reworked and its lower specific gravity means that more applications can be served per kilogram of the material

Specificaties
Kenmerk Waarde
Colour White
Package Type Syringe
Package Size 10 ml
Minimum Operating Temperature -50°C
Maximum Operating Temperature +180°C
Operating Temperature Range -50 → +180 °C
Special Features Based On A Non-Silicone Oil, High Performance Thermal Management Paste, Ideal For Applications Exposed To Varying Temperature And Humidity Conditions, Non-Curing Paste.
Viscosity Measurement 127 → 141Pa/s
Chemical Composition Epoxy Resin
Physical Form Liquid
8 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
8 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
13,46
(excl. BTW)
16,29
(incl. BTW)
Aantal stuks
Per stuk
1 - 5
€ 13,46
6 - 14
€ 12,92
15 +
€ 12,66
Related Products
The required amount of putty is torn from ...
Description:
The required amount of putty is torn from the strip and kneaded by hand until the blue and white strip has turned a uniform colour. Gel time 6 minutes at +20°CWill bond and seal a wide variety of materialsCan be ...
The ITW 500g Devcon epoxy adhesive is a ...
Description:
The ITW 500g Devcon epoxy adhesive is a versatile, durable, two-part epoxy compound for maintenance and repair of a broad range of equipment. It provides non-rusting surfaces repairs and rebuilds worn shafts, pumps and impellers. Provides non-rusting, abrasion and chemical ...
The Electrolube 250g epoxy resin is a flame ...
Description:
The Electrolube 250g epoxy resin is a flame retardant, thermally conductive, 2-part potting and encapsulating compound. This technology used is of the ’clean’ type, leading to relatively low toxicity fumes and low smoke emission. Casting compound for encapsulating electronic assembliesVibration ...
The Araldite 200ml epoxy adhesive is a two-component, ...
Description:
The Araldite 200ml epoxy adhesive is a two-component, thixotropic, structural grey paste available in gel form. It offers excellent environmental and chemical resistance. It is ideal for applications that require higher than normal temperatures in aggressive environmental conditions. This innovative ...