Electrolube ER2074 250 g Bag Epoxy Adhesive

  • RS-stocknr. 160-8469
  • Fabrikantnummer ER2074RP250GR
  • Fabrikant Electrolube
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Casting Compound, Epoxy Resin ER 2074, ER 2183

Casting compound for encapsulating electronic assembliesVibration isolation and prevention of stress exposureER 2074 RS stock no. 160-8469very high thermal transfer properties (thermal conductivity of 1.26W/mK)Entirely free of grinding fillersLow heat emission upon hardeningAt a storage or transport temperature below 10 °C, the product may contain small clots as a result of crystallisation, which impedes its use with dispensing systems. Upon heating to max. 50 °C, crystals dissolve againER 2183 RS stock no. 337-5919high thermal transfer properties, oil-resistant

Electrolube Epoxy Resin

The Electrolube 250g epoxy resin is a flame retardant, thermally conductive, 2-part potting and encapsulating compound. This technology used is of the ’clean’ type, leading to relatively low toxicity fumes and low smoke emission.

Features and Benefits


Very high thermal properties
• Entirely free of grinding fillers
• Low heat emission upon hardening
• High thermal conductivity ideal for heat dissipation within LED applications
• Good environmental protection
resistant to water and chemical
• Does not contain abrasive fillers
low wear on dispensing machinery
• Setting time is 5 hours
• Cure time at 23°C is 24 hours
• Shelf life of 24 Months
• Flame retardant
• The operating temperature ranges between -40°C and 130°C

Applications

• LEDs

Ceramic
• Rubber
• Plastic
• Glass

Potting Compounds: Twin Packs

Specificaties
Kenmerk Waarde
Package Type Bag
Package Size 250 g
Setting Time 5h
Minimum Operating Temperature -40°C
Maximum Operating Temperature +130°C
Trade Name ER2074
Cure Time 1 hrs °C@ 100, 4 hrs °C@ 60, 24 hrs °C@ 25
Flame Retardant Yes
Operating Temperature Range -40 → +130 °C
32 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
16,61
(excl. BTW)
20,10
(incl. BTW)
Aantal stuks
Per stuk
1 - 5
€ 16,61
6 - 14
€ 15,94
15 +
€ 15,61
Related Products
The ITW 500g Devcon epoxy putty is a ...
Description:
The ITW 500g Devcon epoxy putty is a two-part, aluminium-filled compound for maintenance and repair of a broad range of equipment. It can be cast over models for accurate detail reproduction. Aluminium filled pourable epoxy liquid Cost effective moulds, patterns ...
The required amount of putty is torn from ...
Description:
The required amount of putty is torn from the strip and kneaded by hand until the blue and white strip has turned a uniform colour. Gel time 6 minutes at +20°CWill bond and seal a wide variety of materialsCan be ...
The ITW 500g Devcon epoxy adhesive is a ...
Description:
The ITW 500g Devcon epoxy adhesive is a versatile, durable, two-part epoxy compound for maintenance and repair of a broad range of equipment. It provides non-rusting surfaces repairs and rebuilds worn shafts, pumps and impellers. Provides non-rusting, abrasion and chemical ...
Versatile durable two-part epoxy compounds for maintenance and ...
Description:
Versatile durable two-part epoxy compounds for maintenance and repair of a broad range of equipment. Cured repairs can be drilled, tapped, machined or painted which has long-life protection against abrasion, corrosion and chemicals. Fast curing epoxy putty for permanent emergency ...