Araldite 2015 200 ml Beige Dual Cartridge Epoxy Adhesive for Various Materials

  • RS-stocknr. 388-9058
  • Fabrikantnummer 139689000
  • Fabrikant Araldite
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

2015 - Toughened Epoxy Paste

Resistance properties:- ,Chemical - Good,Heat - Good,Water - Good,Impact - Good

Colour - Beige/Neutral
Thixotropic with good gap filling properties. Non sagging up to 10mm thickness
Ideal for bonding dissimilar substrates

Note

Used with RS Sealant Dispener - stock number 503379

Araldite Epoxy Adhesive

The Araldite 2015, 200ml beige dual cartridge epoxy adhesive is compatible with ferrous metal, glass fibre reinforced polymer, non-ferrous metal materials. This adhesive is a 2-component, room temperature curing paste, giving a resilient bond. It is thixotropic and non-sagging up to 10mm thickness. It is particularly suitable for SMC and GRP bonding. The adhesive viscosity at 25°C thixotropic and required cure time is 21 hours.
Note:
Used with RS sealant dispenser

Features and Benefits

• Thixotropic with good gap-filling properties
• Ideal for bonding dissimilar substrates
• Good resistance to chemical, water, heat and impact
• Shear Strength of 17N/mm²
• Operating temperature ranges between 65°C and 100°C

Specificaties
Kenmerk Waarde
Material Compatibility Ferrous Metal, Glass Fibre Reinforced Polymer, Non Ferrous Metal
Colour Beige
Package Type Dual Cartridge
Package Size 200 ml
Minimum Operating Temperature +65°C
Maximum Operating Temperature +100°C
Trade Name Araldite 2015
Cure Time 21 h
Shear Strength 17 N/mm²
Operating Temperature Range +65 → +100 °C
Tijdelijk niet op voorraad – voor levertijd of een alternatief product neem contact op via Live Chat of zoek een vergelijkbaar product op de website.
Prijs Each
58,27
(excl. BTW)
70,51
(incl. BTW)
Aantal stuks
Per stuk
1 - 5
€ 58,27
6 - 14
€ 55,94
15 +
€ 54,77
Related Products
Two-part structural adhesives and dispensing systems which allows ...
Description:
Two-part structural adhesives and dispensing systems which allows the metering, mixing and accurate application of epoxy and acrylic structural adhesives. They ensure accurate ratio mix, fast application with a predetermined flow rate and reduced waste/mess. To apply the adhesive a ...
Introducing the high-quality Epoxy Coating from RS PRO ...
Description:
Introducing the high-quality Epoxy Coating from RS PRO designed as a single part, air-drying, tamper evident seals for screws, nuts, tuneable items and other “factory fixed” components where evidence of unauthorised access is required. It is ideal for application onto ...
Conveniently-packaged epoxy system that provides a tough, thermally ...
Description:
Conveniently-packaged epoxy system that provides a tough, thermally stable, epoxy protective conformal coating. Provides a hard, durable, protective green coatingExcellent dielectric properties; help prevent electrical dischargeProtects against moisture and abrasionIdeal for pre-reflow solder resist repairService ...
Our RS Pro range of heat cured SMT ...
Description:
Our RS Pro range of heat cured SMT Adhesive is a one part thixotropic paste adhesive that will provide a great bond for the protection of electronic components by either dipping or “glob topping. It packs a punch in great ...