ESD Continuous Monitor 100 → 120V ac

  • RS-stocknr. 918-5618
  • Fabrikantnummer 724MO
  • Fabrikant SCS
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

SCS 724 Workstation Monitor

The SCS 724 workstation monitor allows you to monitor not only the operation of two wrist strap grounding systems but also two work surfaces. The monitor is designed and tested to be used with SCS dual conductor wrist straps and SCS work surfaces grounding systems. If for any reason the wrist strap malfunctions the workstation alarm will signal which strap or work surface is failing. The monitor also allows you to select test voltages of 9 or 16 V and resistance limits of 10 Megohms or 35 Megohms.

FEATURES and BENEFITS:
Monitors two wrist strap grounding systems
Monitors two work surfaces
Dual conductor wrist straps
Monitors two operators
Two test voltages 9 and 16 V
Two resistance limits 10 and 35 Megohms
Current limiting resistor
Audible alarm

DIMENSIONS:
16.5 x 7.9 x 3.5 cm
Remote 7 x 2.5 x 2.5 cm

INCLUDES:
Monitor
Operator remote
Power adapter for North America
Monitor ground cord
Two wire connector
Mounting screws
Wire management clips

Note

Works with EU/UK Plug Adapter - 9185605

Approvals

ANSI/ESD S20.20, ESD handbook ESD TR20.20

Specificaties
Kenmerk Waarde
Terminal Type Snap
Supply Voltage 100 → 120V ac
Number of Operators 1
Height 35 mm
Length 165mm
Number of Worksurfaces 1
Width 79mm
Supervisor Monitoring No
Parking Station No
Charge Detection No
EOS Detection No
Complies with EN 61340-5-1 Yes
8 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
205,21
(excl. BTW)
248,30
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 205,21
10 - 19
€ 197,00
20 +
€ 190,84
Related Products
This small set point isolator module accepts virtually ...
Description:
This small set point isolator module accepts virtually all standard industrial control voltages (i.e. 0-5V, 0-10V, 4-20mA, 0-20mA). Also incorporated are relays to control the reversing version of the low power motor controllers. Provides intrinsically safe control voltages for mains ...
The SCS Iron Man Plus workstation monitor detects ...
Description:
The SCS Iron Man Plus workstation monitor detects electrical overstress (EOS), preventing IC and system damage. • Monitors a voltage level that is being generated on a printed circuit board while working on it • Monitors resistance to ground of ...
The Desco universal power adapter has a 10mm ...
Description:
The Desco universal power adapter has a 10mm snap and 10mm jack type terminal. The supply voltage for this power adapter is 24VDC or 100VAC to 240VAC and has an EOS detection.
Small size 70mm x 53mm takes up minimal ...
Description:
Small size 70mm x 53mm takes up minimal worksurface areaTwo 10mm threaded studs installed on bottom of unit permanently snap monitor flush on matUses reliable wave distortion technology: provides true 100% continuous monitoring - no false alarms and no pulsed ...