RS PRO ESD Rack Bonding Point with 10 mm Stud

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

RS PRO ESD Rack Bonding Point

The RS PRO anti-static easy to fit rack bonding point lets you create a designated ESD grounding point on panels, racks and cabinets. The EBP kit has a 10 m connection which is then electrically bonded to the mounting or earth by the user. The mounting plate is 25 x 35 mm in size and clearly states ’ESD BONDING POINT’.

This kit comes assembled and includes the following parts:
10mm Press Stud
M5 Ring Terminal
Vinyl Plate
M3 Nut
Plastic Shoulder Washer
M3 Screw
Shakerproof Washer
M3 Washer

RS PRO have a great range of ESD grounding accessories including bonding plugs, bonding boxes, bonding brackets and cords plus many more to help eliminate the build up of static discharge which can be a risk to static sensitive components or devices.

Features and Benefits:

  • Easy to fit to rack or cabinet

  • Mounting plate 25 x 35 mm in Yellow ABS - easily recognised marking yellow on black colours

  • Complete with isolated screw for earth connection

  • 1 x 10 mm male stud connection

Typical Applications

ESD grounding accessories form part of a workplace safety system to monitor and/or eliminate the build-up or discharge of static electricity that may pose a risk to electrical components such as computer hard drives.

What are ESD grounding accessories used for?

ESD (electrostatic discharge) grounding accessories are components within ESD grounding loops. These accessories are used in workplaces where sensitive electronic equipment must be protected from static electricity, or where there's a danger of flammable liquids or gases igniting.

ESD protection is achieved by electrical grounding. Grounding accessories are components that may be required as part of an entire ESD grounding system. They're often used to connect and integrate ESD-safe mats, ESD continuous monitors, wrist straps, ESD safe shoe covers and other apparel, or ESD-safe surfaces.

Standards

Supports ESD S20.20 and EN 61340-5-1 ESD control programme compliance

Specificaties
Kenmerk Waarde
Accessory Type Rack Bonding Point
Connector Type 10 mm Stud
Complies with EN 61340-5-1 Yes
785 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1750 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
6,79
(excl. BTW)
8,22
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 6,79
10 - 19
€ 6,51
20 +
€ 6,32
Related Products
The SCS ESD grounding cord is the 2300 ...
Description:
The SCS ESD grounding cord is the 2300 series, dual conductor coil card. It has 3.4mm straight mono plug which is designed to use with dual wire wristband and dual wire continuous monitors. If one conductor is damaged, the operator ...
The SCS ESD grounding cord is a 15ft ...
Description:
The SCS ESD grounding cord is a 15ft 20AWG PVC wire. It has moulded-in male snap fastener with integral 1Mohm resistor on one end and solderless terminal on other. It comes in black nylon cover with black polyester insert and ...
The most efficient way of ensuring optimum personal ...
Description:
The most efficient way of ensuring optimum personal grounding is to employ the combination of ESD footwear and ESD matting. Smooth conductive floor mat, very highly resistant to wear and abrasion, which make it ideal for use in work areas ...
Wrist band clips onto the 4.5mm diameter pip ...
Description:
Wrist band clips onto the 4.5mm diameter pip on the Connector. (Connector available separately and supplied qty 10 per bag)M6 T-nut recommended to attach connector to strut profile.