Conductive ESD Box 394mm (L) 318mm (W) 64mm (H)
- RS-stocknr.:
- 539-233
- Fabrikant:
- RS PRO
1 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
29 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs 1 partij 10
€ 519,60
(excl. BTW)
€ 628,72
(incl. BTW)
| Lot(s) | Per lot | Per stuk* |
| 1 - 9 | € 519,60 | € 51,96 |
| 10 - 19 | € 498,82 | € 49,882 |
| 20 + | € 483,23 | € 48,323 |
| *prijsindicatie | ||
- RS-stocknr.:
- 539-233
- Fabrikant:
- RS PRO
Datasheets
Wetgeving en compliance
- Land van herkomst:
- GB
Productomschrijving
RS PRO Conductive Conductive B Flute Cardboard ESD Box, 394 x 318 x 64 mm
Looking for a box to safely transport or store your ESDS (electrostatic discharge-sensitive) devices or components? This RS PRO conductive transport box is made from durable corrugated cardboard and features a cushioned B-flute design with a conductive coating to protect delicate components or printed circuit board (PCB) assemblies.
The inside of the box features an egg-crate-shaped antistatic foam lining for an additional layer of protection. The flap lid closes firmly for security during transit. The exterior of the box is clearly marked in yellow with a caution notice and ESD (electrostatic discharge) logo.
Laboratories and electronics manufacturers often use conductive boxes like these to prevent electrostatic damage to items such as microcircuits, resistor chips and integrated circuits. Blank address labels are included, so the box is ready for shipping or storage.
The inside of the box features an egg-crate-shaped antistatic foam lining for an additional layer of protection. The flap lid closes firmly for security during transit. The exterior of the box is clearly marked in yellow with a caution notice and ESD (electrostatic discharge) logo.
Laboratories and electronics manufacturers often use conductive boxes like these to prevent electrostatic damage to items such as microcircuits, resistor chips and integrated circuits. Blank address labels are included, so the box is ready for shipping or storage.
Features and Benefits
- Static shielding
- Surface resistivity range of 10.6 Ω
- Not dissipative
- Dimensions of 394 (length) x 318 (width) x 64 mm (height)
- Complies with RoHS (Restriction of Hazardous Substances) standards
- Conforms to ANSI/ESD S20.20:2014 and BS EN 61340-5-1:2007 electrostatic control standards
Specificaties
Kenmerk | Waarde |
|---|---|
| Material Properties | Conductive |
| Height | 64mm |
| Length | 394mm |
| Width | 318mm |
| Surface Resistivity Range | 10.6Ω |