- RS-stocknr.:
- 820-810
- Fabrikant:
- RS PRO
- RS-stocknr.:
- 820-810
- Fabrikant:
- RS PRO
Datasheets
Wetgeving en compliance
- Land van herkomst:
- GB
Productomschrijving
RS PRO Conductive Polypropylene ESD Box, 232 x 130 x 33 mm
Need a safe way to transport multiple integrated circuits between job sites? This large black storage box from our RS PRO range is made with a hard, conductive polypropylene casing to protect your components from knocks and static.
Inside, the box is lined with a 6 mm high-density foam base and a 6 mm low-density foam lid to cushion your sensitive devices. The large-sized box can store up to 130 16-pin integrated circuits, so there's plenty of space for carrying multiple components.
The box has a snap-close lid to keep everything secure and is labelled with the ESD (electrostatic discharge) protective symbol for easy identification. It meets IEC (International Electrotechnical Commission) standard 61340-5-3 for the protective packaging of ESD-sensitive devices.
Inside, the box is lined with a 6 mm high-density foam base and a 6 mm low-density foam lid to cushion your sensitive devices. The large-sized box can store up to 130 16-pin integrated circuits, so there's plenty of space for carrying multiple components.
The box has a snap-close lid to keep everything secure and is labelled with the ESD (electrostatic discharge) protective symbol for easy identification. It meets IEC (International Electrotechnical Commission) standard 61340-5-3 for the protective packaging of ESD-sensitive devices.
Features and Benefits
Dimensions of 232 (length) x 130 (width) x 33 mm (depth)
Snap-close lid
Melting temperature of +80°C to +90°C
Static shielding
Surface resistivity range of 10.6 Ω
Suitable for shipping and storage of circuit boards
Not anti-static
Not dissipative
Complies with RoHS (restriction of hazardous substances) standards
Complies to ANSI/ESD S20.20:2014 (protection of parts against electrostatic discharge)
Complies to BS EN 61340-5-1:2007 (protection of electronic devices from electrostatic phenomena)
Snap-close lid
Melting temperature of +80°C to +90°C
Static shielding
Surface resistivity range of 10.6 Ω
Suitable for shipping and storage of circuit boards
Not anti-static
Not dissipative
Complies with RoHS (restriction of hazardous substances) standards
Complies to ANSI/ESD S20.20:2014 (protection of parts against electrostatic discharge)
Complies to BS EN 61340-5-1:2007 (protection of electronic devices from electrostatic phenomena)
Specificaties
Kenmerk | Waarde |
---|---|
Material Properties | Conductive |
Height | 33mm |
Length | 232mm |
Width | 130mm |
For Use With | ICs and Small Components |
Surface Resistivity Range | 10.6Ω |