RS PRO Ethernet Media Converter

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TW
Productomschrijving

RS Ethernet Converter (RJ45‐Fiber)

10/100Base-TX to 100Base-FX Converter
Auto-Negotiation or forced mode
Auto MDI/MDIX
Forward 2046 bytes (Max.) packets in switch mode
Forward 9K jumbo packets in converter mode
Supports Q in Q double tagged frame transparent
Supports IEEE 802.1q Tag VLAN pass through
Supports local / remote In-band management (Monitor and Configure) by the SNMP manager with FRM220-10/100iSpecifications
Bandwidth control (Nx32K or Nx512Kbps)
Supports flow control (Pause)
Supports remote CPE power fail detect (dying gasp)
Supports Far End Fault Indication (FEFI)
Supports Link Fault Pass-Through (LFPT )
Supports Loop Back Test
Supports RMON counter
Auto Laser Shutdown (ALS)
Fiber Hardware Reset (FHR)
Online local / remote f/w upgrade

Connector: 1x9 (ST)
Data rate: 125Mbps
Duplex mode: Full duplex
Fiber: MM 62.2/125μm
Distance: MM 2km
Wavelength: MM 1310nm
Power Input: AC 100∼240V
LEDs: Power, FX Link, TX SPD, TX Link, TX Duplex, FEF

Optical Interface:

Standards

IEEE 802.3, IEEE 802.3u

Tijdelijk niet op voorraad – voor levertijd of een alternatief product neem contact op via Live Chat of zoek een vergelijkbaar product op de website.
Prijs Each
153,37
(excl. BTW)
185,58
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 153,37
Related Products
The 110VDSLEXTGB VDSL Ethernet extender kit allows you ...
Description:
The 110VDSLEXTGB VDSL Ethernet extender kit allows you to span a 10/100 network over extremely long distances (up to 1km) while still maintaining high-speed network connectivity. The device allows you to run the connection over standard RJ45 cabling, existing RJ11 ...
The MCM110SC2GB 10/100 Multi Mode Fiber Ethernet Media ...
Description:
The MCM110SC2GB 10/100 Multi Mode Fiber Ethernet Media Converter SC 2 km creates an economical, cost-effective Ethernet-fiber link, transparently converting to/from 10Base-T or 100Base-Tx Ethernet signals and 100Base-Fx optical signals to extend an Ethernet network connection over an SC terminated ...
Media Converter card module designed for installation into ...
Description:
Media Converter card module designed for installation into the ETCHS2U Rackmount ChassisOpen SFP slot supports Single / Multi-Mode Gigabit SFPs at varying distancesAdvanced features include Link-loss forwarding, remote monitor status, two frame lengthsSupports full or half-duplex operationEasy to use and ...
Plug-and-play design for simple installation, no configuration orsoftware ...
Description:
Plug-and-play design for simple installation, no configuration orsoftware requiredUses existing coaxial cable, RG-59, RG-6, RG-7, or RG-11Transmit up to 2.4 km (1.5 mi)Transparent TCP/IP OperationsAuto-MDIX and Auto-negotiation 10/100/1000Base-T and Full orHalf-Duplex on the Ethernet portStatus LEDs for simple ...