Microchip KSZ8061MNGW, Ethernet Transceiver, 10Mbps, 3.3 V, 48-Pin QFN
- RS-stocknr.:
- 122-4830
- Fabrikantnummer:
- KSZ8061MNGW
- Fabrikant:
- Microchip
352 op voorraad - levertijd is 1 werkdag(en).
Toegevoegd
Prijs Elk (in een pakket van 4)
€ 2,54
(excl. BTW)
€ 3,07
(incl. BTW)
| Aantal stuks | Per stuk | Per pak* |
| 4 - 16 | € 2,54 | € 10,16 |
| 20 - 44 | € 2,318 | € 9,272 |
| 48 - 196 | € 2,255 | € 9,02 |
| 200 + | € 2,208 | € 8,832 |
| *prijsindicatie | ||
- RS-stocknr.:
- 122-4830
- Fabrikantnummer:
- KSZ8061MNGW
- Fabrikant:
- Microchip
Datasheets
Wetgeving en compliance
Productomschrijving
KSZ8061M 10/100 Ethernet Transceiver
The Microchip KSZ8061 is a 10Base-T/100Base-TX Ethernet Transceiver designed for applications using Unshielded Twisted Pair (UTP) cable. The features of the KSZ8061 make it ideal for automotive applications.
Featured is Quiet-WIRE®, technology that delivers programmable, integrated noise filtering to reduce emissions and enhance immunity. Quiet-WIRE® allows the KSZ8061 to operate in applications with stringent emission limits where previously more costly Shielded Cable was needed.
This KSZ8016M variant features a Media Independent Interface (MII) interface to connect with Ethernet MAC Processors and Switches.
Featured is Quiet-WIRE®, technology that delivers programmable, integrated noise filtering to reduce emissions and enhance immunity. Quiet-WIRE® allows the KSZ8061 to operate in applications with stringent emission limits where previously more costly Shielded Cable was needed.
This KSZ8016M variant features a Media Independent Interface (MII) interface to connect with Ethernet MAC Processors and Switches.
Features
Quiet-WIRE® Programmable EMI Filter
Exceeds AEC-Q100 and EMC requirements
MII interface with MDC/MDIO management interface for register configuration
On-chip Termination Resistors for differential pairs
LinkMD®+ Receive Signal Quality Indicator
Supports IEEE 802.3az Energy Efficient Ethernet
Ultra Deep Sleep standby mode
Loopback mode for diagnostics
Programmable interrupt output
Exceeds AEC-Q100 and EMC requirements
MII interface with MDC/MDIO management interface for register configuration
On-chip Termination Resistors for differential pairs
LinkMD®+ Receive Signal Quality Indicator
Supports IEEE 802.3az Energy Efficient Ethernet
Ultra Deep Sleep standby mode
Loopback mode for diagnostics
Programmable interrupt output
Ethernet Communications - Microchip
Specificaties
Kenmerk | Waarde |
|---|---|
| IC Type | Transceiver IC |
| Data Rate | 10 Mbps, 100Mbps |
| Number of Transceivers | 1 |
| Standard Supported | IEEE 802.3az |
| Mounting Type | Surface Mount |
| Package Type | QFN |
| Pin Count | 48 |
| Typical Operating Supply Voltage | 3.3 V |
| Dimensions | 7 x 7 x 0.8mm |
| Minimum Operating Temperature | -40 °C |
| Maximum Operating Temperature | +105 °C |