RE334-LF, Double Sided DIN 41612 C Eurocard PCB FR4 With 32 x 53 1mm Holes, 2.54 x 2.54mm Pitch, 160 x 100 x 1.5mm

Datasheets
Wetgeving en compliance
N.v.t.
Productomschrijving

Matrixboard with Ground Plane

Hot air levelled
Through holes have etched-free ring on ground plane side to provide isolated ground plane on component side
Plated through holes for both DIN connector and PCB matrix (RE334 only)
Ground plane designed to reduce EMI problems in high frequency circuits
Connector type DIN 41612 (C-96/abc)
Epoxy Glass
Double sided
Board size 100 x 160 x 1.5mm
Hole pitch 2.54mm (0.1 in)
Hole dia 1.0mm
Copper thickness 35μm

DIN Type Matrixboard

Matrix boards with 1mm holes on a 2.54mm pitch.

Specificaties
Kenmerk Waarde
Base Material Epoxy Glass Fabric Laminate
Number of Sides 2
Dimensions 160 x 100 x 1.5mm
Copper Thickness 35µm
Hole Diameter 1mm
Hole Layout 32 x 53
Hole Pitch 2.54 x 2.54mm
Connection DIN 41612 C
FR Material Grade FR4
Length 160mm
Thickness 1.5mm
Width 100mm
69 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
19,14
(excl. BTW)
23,16
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 19,14
5 - 9
€ 18,18
10 - 39
€ 17,27
40 +
€ 16,40
Related Products
The double-sided microboards are designed for microprocessor applications ...
Description:
The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way ...
The double-sided microboards are designed for microprocessor applications ...
Description:
The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way ...
The double-sided microboards are designed for microprocessor applications ...
Description:
The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way ...
HF Verocard for circuits with a critical assembly.Component ...
Description:
HF Verocard for circuits with a critical assembly.Component side fully laminated with etched holes. Maximum isolation through grounding of the lamination. For reliable HF, digital and analogue circuits34 parallel circuit tracks, each with 540 holesNumerical gridDIN 41612 connector receptacle.