RE200-DSPT, Double Sided Eurocard PCB FR4 With 38 x 61 1.11mm Holes, 2.54 x 2.54mm Pitch, 160.15 x 100.2mm

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

Double-Sided Prototyping Boards

These prototyping boards from Roth Elektronik are available in a range of sizes with the following features:

Double-sided
Hot air levelling – HAL-lead-free
With holes – spacing: 2.54 x 2.54 mm
35 μm CU
Size: 100 x 160 mm
RS Stock No. 808-8382 Plated Through Holes RS Stock No. 808-8398 Non Plated Through Holes

DIN Type Matrixboard

Matrix boards with 1mm holes on a 2.54mm pitch.

Specificaties
Kenmerk Waarde
Base Material Epoxy Glass Fabric Laminate
Number of Sides 2
Dimensions 160.15 x 100.2mm
Copper Thickness 35µm
Hole Diameter 1.11mm
Hole Layout 38 x 61
Hole Pitch 2.54 x 2.54mm
FR Material Grade FR4
Length 160.15mm
Thickness 1.5mm
Width 100.2mm
79 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
14,41
(excl. BTW)
17,44
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 14,41
5 - 9
€ 13,69
10 - 39
€ 13,01
40 +
€ 12,35
Related Products
Prototyping boards manufactured from epoxy glass material to ...
Description:
Prototyping boards manufactured from epoxy glass material to BS 4584 part 3 or 16. Card thickness is 1.6 mm. Copper is 305 g/m (1 oz/ft). Edge connector fingers are gold plated to a thickness of 1.5 microns. 1.0 mm (0.040 ...
The double-sided microboards are designed for microprocessor applications ...
Description:
The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way ...
The double-sided microboards are designed for microprocessor applications ...
Description:
The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way ...
The double-sided microboards are designed for microprocessor applications ...
Description:
The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way ...