RE212-LFDS, Double Sided Eurocard PCB FR4 With 38 x 61 1mm Holes, 2.54 x 2.54mm Pitch, 160.15 x 100.2mm

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

Double-Sided Prototyping Boards

These prototyping boards from Roth Elektronik are available in a range of sizes with the following features:

Double-sided
Hot air levelling – HAL-lead-free
With holes – spacing: 2.54 x 2.54 mm
35 μm CU
Size: 100 x 160 mm
RS Stock No. 808-8382 Plated Through Holes RS Stock No. 808-8398 Non Plated Through Holes

DIN Type Matrixboard

Matrix boards with 1mm holes on a 2.54mm pitch.

Specificaties
Kenmerk Waarde
Base Material Epoxy Glass Fabric Laminate
Number of Sides 2
Dimensions 160.15 x 100.2mm
Copper Thickness 35µm
Hole Diameter 1mm
Hole Layout 38 x 61
Hole Pitch 2.54 x 2.54mm
FR Material Grade FR4
Length 160.15mm
Thickness 1.5mm
Width 100.2mm
63 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
10,41
(excl. BTW)
12,60
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 10,41
10 - 19
€ 9,99
20 - 49
€ 9,68
50 +
€ 8,84
Related Products
The double-sided microboards are designed for microprocessor applications ...
Description:
The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way ...
The double-sided microboards are designed for microprocessor applications ...
Description:
The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way ...
The RE3001-LF Eurocard is a two-sided laboratory board ...
Description:
The RE3001-LF Eurocard is a two-sided laboratory board for Arduino applications. The Eurocard has been designed in an epoxy glass hard fabric and is 100mm x 160mm in dimension. Laboratory board for Arduino applicationsEpoxy glass hard fabric FR4 1.50 mmTwo-sided ...
The double-sided microboards are designed for microprocessor applications ...
Description:
The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way ...