220-42779J, 64 Way Double Sided DIN 41612 Extender Board FR4

Datasheets
Wetgeving en compliance
Niet conform
Land van herkomst: GB
Productomschrijving

Width Adaptable Extender Board (PTH)

Double sided pth glass fibre extender boards for use with both 160mm and 220mm deep Eurocards in 64-way or 96-way DIN 41612 connector options.

Plug link facility for disconnection of each line allows voltage/logic status checks etc.
Plug links arranged in rows of 32
Fitted at each end with DIN41612 indirect edge connectors
64-way fitted with connector for logic analyser or bus termination (provision for one on 96-way)

Note

By using additional extender boards and optional spacer kit, extenders may be constructed for 6U, 9U, 12U widths etc.

Supplied with

2 support arms/ejectors

PC / VME Bus Boards

PC Compatible Prototyping Boards

Prototyping boards manufactured from epoxy glass material to BS 4584 part 3 or 16. Card thickness is 1.6 mm. Copper is 305 g/m² (1 oz/ft²). Edge connector fingers are gold plated to a thickness of 1.5 microns. 1.0 mm (0.040 in.). Diameter holes are pre-drilled on a 2.54 mm (0.1 in.) matrix.

Microboard Pattern

Incorporates, on the component side of the card, a colander ground plane for maximum screening and glitch free high speed operation, and complete solder mask protection.

Specificaties
Kenmerk Waarde
Type Extender Board
Connection DIN 41612
Number of Contacts 64
Base Material Epoxy Glass Fabric Laminate
Number of Sides 2
FR Material Grade FR4
Thickness 1.6mm
Width 160 mm, 220 mm
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
225,27
(excl. BTW)
272,58
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 225,27
Related Products
Adaption circuit board for Molex FPC/FFCEpoxy fibre-glass FR4 ...
Description:
Adaption circuit board for Molex FPC/FFCEpoxy fibre-glass FR4 1.50 mmDouble-sided 35 μm CuPlated through holes (PTH)Surface chem. Ni/AuSolder stop mask50 solder pads with 1.00 mm pitch50 solder pads with 0.50 mm pitchHole spacing 2.54 mm2 Pick-up-holes Ø 3.20 mm.
Adaption circuit board for TQFP32 to TQFP64 (0.80 ...
Description:
Adaption circuit board for TQFP32 to TQFP64 (0.80 mm pitch)Epoxy fibre-glass FR4 1.50 mmDouble-sided 35 μm CuPlated through holes (PTH)Surface chem. Ni/AuSolder stop maskHole spacing 2.54 mmExternal switching options on the bottom side with 0603 SMD-Pads one pin eachResistors or ...
Adaption circuit board for QFP32 & QFN32 (0.50 ...
Description:
Adaption circuit board for QFP32 & QFN32 (0.50 mm pitch)Epoxy fibre-glass FR4 1.50 mmDouble-sided 35 μm CuPlated through holes (PTH)Surface chem. Ni/AuSolder stop maskHole spacing 2.54 mmExternal switching options on the bottom side with 0603 SMD-Pads one pin eachResistors or ...
Adaption circuit board for QFN20 (0.50 mm pitch)Epoxy ...
Description:
Adaption circuit board for QFN20 (0.50 mm pitch)Epoxy fibre-glass FR4 1.50 mmDouble-sided 35 μm CuPlated through holes (PTH)Surface chem. Ni/AuSolder stop maskHole spacing 2.54 mmFits on sockets with a distance of 15.24 mmShield pad and cooling field.