RE907, Double Sided Extender Board Adapter Adapter With Adaption Circuit Board FR4 12.5 x 12.5 x 1.5mm

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

RE907 Adapter SOT 23-10

Adaption circuit board for SOT23-10 with 0.95 mm pitch
Epoxy fibre-glass FR4 1.50 mm
Double-sided 35 μm Cu
Plated through holes (PTH)
Surface chem. Ni/Au
Solder stop mask
Hole spacing 2.54 mm
Shield pad

Specificaties
Kenmerk Waarde
Type Adapter With Adaption Circuit Board
Base Material Epoxy fibre-glass
Number of Sides 2
Dimensions 12.5 x 12.5 x 1.5mm
Copper Thickness 35µm
FR Material Grade FR4
Length 12.5mm
Thickness 1.5mm
Width 12.5mm
23 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
2,23
(excl. BTW)
2,70
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 2,23
Related Products
Prototyping boards manufactured from epoxy glass material to ...
Description:
Prototyping boards manufactured from epoxy glass material to BS 4584 part 3 or 16. Card thickness is 1.6 mm. Copper is 305 g/m² (1 oz/ft²). Edge connector fingers are gold plated to a thickness of 1.5 microns. 1.0 mm (0.040 ...
Complies with military standard P 13949F M12 13949F. ...
Description:
Complies with military standard P 13949F M12 13949F. Professional quality boards with blue coloured positive resinFire resistance: UL 94-V0Board material Glass-Epoxy FR4.
Pre-scored break-lines allow individual module separation2 component sides ...
Description:
Pre-scored break-lines allow individual module separation2 component sides with gold and solder stop mask coatingPlated through holesEpoxy fibre-glass FR4Board size 120 x 175 x 1.5mmHole dia 1.0mm.
1.5 mm FR4 epoxy, 35 μm CU on ...
Description:
1.5 mm FR4 epoxy, 35 μm CU on both sidesPlated drill holes, Ø 1 mmSoldering and component side surface made of chem. nickel/gold (Ni/Au) and solder maskPre-scored breaking points for detaching individual modules from the boardSize 72.6 x 76.2 mmAdaption ...