Fan Speed Controller, Infinitely Variable, 10 V dc, 1.1mA

  • RS-stocknr. 743-4807
  • Fabrikantnummer CN1003
  • Fabrikant ebm-papst
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

EC PCB Fan Speed Controllers

Unboxed manual speed controllers for use with EBM-Papst EC (electronically commutated) fans. These are all purely the control assembly and PCB and are not mounted in an enclosure.

CN1003 (743-4807) variable speed controller

The CN1003 (743-4807) unboxed controller is designed for use with the full range of ebm-papst ECi (Electronically Commutated with integrated electronics) fans. It is powered via the DC output from by the fan and provides a 0-10V signal to enable infinitely variable speed control. The controller also enables speed measurement of the fan using a multimeter with a frequency measuring facility (where a tacho output is provided from the fan). Specification: Input voltage 10 VDC (supplied from fan); Maximum ambient temperature 50°C; Mounting hole diameter 10mm; Output voltage range 0-10 VDC.

CN1064 (743-4810) 5 position speed controller

The CN1064 (743-4810) unboxed 5 speed controller is designed for use with the full range of ebm-papst EC fans. Powered by the 10VDC output from the motor, it provides variable speed control with 5 speed settings. Each setting can be adjusted during commissioning between 0 % to 100% speed. This controller can control multiple fans running at the same speed. No separate power supply required.

CN1063 (743-4817) adjustable max / min variable speed controller

The CN1063 (743-4817) unboxed controller is designed for use with the full range of ebm-papst EC fans. Powered by the 10V DC output from the motor, it provides infinitely variable, manual speed control between 0% and 100%. However, the CN1063 (743-4817) differs from the CN1003 (743-4807) in that it has adjustable limits. The maximum and minimum speeds can be varied during commissioning to limit the maximum speed and/or restrict the lower speed. No separate power supply is required.

Specificaties
Kenmerk Waarde
For Use With Ebm-papst EC Fans
Speed Settings Infinitely Variable
Maximum Current 1.1mA
Supply Voltage 10 V dc
27 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
48 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
13,79
(excl. BTW)
16,69
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 13,79
Related Products
Fan speed control and alarm board providing intelligent ...
Description:
Fan speed control and alarm board providing intelligent control of airflow based on thermal needs of the equipment. Provides high power efficiency >90%Monitors tachometer signals from fansSmall size for location in fan traysI2C bus interfaceIndividual fan statusVortex board is a ...
Vent Axia ACM in-line mixed flow duct fans ...
Description:
Vent Axia ACM in-line mixed flow duct fans specifically designed for rigid and flexible ducting offering 2 times the pressure development of conventional axial fans. Designed and manufactured in the UKSupplied complete for installationCan operate in both horizontal and vertical ...
An in-line centrifugal duct fan combining the acoustic ...
Description:
An in-line centrifugal duct fan combining the acoustic benefits of a tough plastic casing with the pressure characteristics of a centrifugal impeller. Extra length spigots allow for easy securing of the ducting. They are ribbed to give extra gripRobust, fire ...
These fans develop higher static pressure than mixed ...
Description:
These fans develop higher static pressure than mixed flow or axial fans making them suitable for high performance/volume applications etc. Compact design for use in confined spacesOutlet guide vanes straighten air flowMaintenance free motor, totally enclosed with thermal protectionGalvanised steel ...