Laird Technologies Ferrite Bead (Snap-On EMI Core, Split EMI Core), 18.75 x 53.39mm (0592), 232Ω impedance at 25 MHz

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

Broadband Split/Snap-on Cores

These easy installation ferrite cores are designed to reduce electromagnetic interference from being induced or radiated. They are available in a variety of sizes and suitable for applications from 30MHz to 1GHz. These ferrite cores provide excellent common and differential mode EMO suppression on cable assemblies

Rectangular ferrites are suitable for data cables e.g. telephone or signal lines
Circular ferrites are suitable for mains cables e.g. on photocopying machines, printers and other office equipment

Split Ferrite Rings

These split ferrite cores reduce the electromagnetic interference from being induced in or radiated from data and power cables. High attenuation ratings are achieved with the housing design and the special process steps during the ferrite manufacture. The special snap lock makes the ferrite sleeve suitable for use with a variety of cable diameters and once the split ferrite is locked it cannot be opened accidentally.The outer housing is designed to protect the halves of the core from breakage and ensures simple assembly on to cables that are already installed or which have been fitted with connectors. Fixing to the cable with glue or cable tie is optional. Typical applications for these split ferrite cores include data or power lines used in computer technology, terminals, industrial controllers, medical engineering and office machines.

Specificaties
Kenmerk Waarde
Package Type 0592
Impedance at 25 MHz 232Ω
Impedance at 100 MHz 511Ω
Impedance at 300 MHz 627Ω
Type Snap-On EMI Core, Split EMI Core
Dimensions 18.75 x 53.39mm
Length 53.39mm
Diameter 18.75mm
Application EMI Suppression
Material Ferrite
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 28-01-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Pack of 50)
0,96
(excl. BTW)
1,16
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
50 - 450
€ 0,96
€ 48,00
500 - 1200
€ 0,759
€ 37,95
1250 - 2450
€ 0,701
€ 35,05
2500 - 4950
€ 0,682
€ 34,10
5000 +
€ 0,647
€ 32,35
*prijsindicatie
Related Products
From Wurth Elektronik, these ferrite beads are used ...
Description:
From Wurth Elektronik, these ferrite beads are used for suppressing high-frequency interference in electronic circuits. The chokes support a constant current of 3A, though 5A is possible for short periods. Different core materials result in different suppression profiles. These through-hole ...
Excellent anti-EMI properties and low DC resistancePlaced very ...
Description:
Excellent anti-EMI properties and low DC resistancePlaced very close next to the interference source even with smallest size 0402, maximum impedance 1000ΩReliable Ni-Sn electrodes Ideal for data line filtering and voltage de-couplingHigh rated current up to 6A Recommended for reflow ...
BLM ferrite beads from Murata are ideal for ...
Description:
BLM ferrite beads from Murata are ideal for use in circuits with unstable ground lines as they do not require a ground connection. At noise frequencies, these ferrite beads are designed to function nearly as a resistor, leaving signal wave ...
These Laird ferrite chip beads have been professionally ...
Description:
These Laird ferrite chip beads have been professionally designed to provide cost-effective EMI filtering of differential mode noise for power lines, general signal lines and high speed signal lines. The ferrite chip beads have an ultra-compact design and have a ...