Wurth Elektronik Ferrite Ring Toroid Core, For: EMI Suppression, 9 x 5 x 8mm

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

EMI Suppression Toroidal Ferrite - WE-TOF Series

The WE-TOF series NiZn Broadband absorber ferrite cores available in a diverse type and range of NiZn to give the best possible interference suppression. This series of EMI suppression tordial ferrite cores are suitable for use with standard wire, twisted wire, multi conductor and Co-axial cables.

Applications for the WE-TOF series include power supplies cable, data cable and measurement signal lines cable

//media.rs-online.com/t_line/LD260668-01.gif
Specificaties
Kenmerk Waarde
Type Toroid Core
Dimensions 9 x 5 x 8mm
Application EMI Suppression
Material 4 W 620
Diameter 8mm
Height 8mm
Inner Diameter 5mm
Outer Diameter 9mm
150 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
225 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Bag of 5)
0,50
(excl. BTW)
0,60
(incl. BTW)
Aantal stuks
Per stuk
Per zak*
5 - 45
€ 0,50
€ 2,50
50 - 95
€ 0,46
€ 2,30
100 - 195
€ 0,442
€ 2,21
200 - 245
€ 0,42
€ 2,10
250 +
€ 0,40
€ 2,00
*prijsindicatie
Verpakkingsopties
Related Products
Wurth Elektronik axial ferrite rings fit over the ...
Description:
Wurth Elektronik axial ferrite rings fit over the cable, absorbing energy emitted by cables without affecting the transmitted data. These ferrite rings can be fixed on the cable by using heat shrink sleeving. Attenuation is better than ferrite rings owing ...
The ESD-R Series solid toroidal cores are designed ...
Description:
The ESD-R Series solid toroidal cores are designed for use on round CablesA wide range of MnZn and NiZn options are available in Bare, Coated, and Case types. These are used in consumer electronics.
These split ferrite cores reduce the electromagnetic interference ...
Description:
These split ferrite cores reduce the electromagnetic interference from being induced in or radiated from data and power cables. High attenuation ratings are achieved with the housing design and the special process steps during the ferrite manufacture. The special snap ...
Allows the ferrite to be fixed to cable ...
Description:
Allows the ferrite to be fixed to cable bundles and harnesses regardless of diameterHeld in place by closing off the slit section using a single binderIdeal for VE/CD applications.