3M ST-II Multimode Fibre Optic Adapter

  • RS-stocknr. 459-020
  • Fabrikantnummer THREADED INLINE COUPLER ST
  • Fabrikant 3M
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

ST II-Compatible Connector

Multimode ST® compatible connector which offers low installed cost and high performance. The connector offers excellent repeatability and is supplied with a high quality PC (physical contact) finish on advanced ceramic ferrule which ensures outstanding reflection characteristics. Each connector is suitable for mounting to 900mm secondary coated fibre and 3mm jacketed cable, with a separate adaptor available for mounting to 2·5mm cable. Designed for ease of termination, field assembly is quick and all the essential tooling is available in this section with the procedure outlined in an data sheet. A suitable interchangeable die set is offered for crimping the connector using crimp tool 242-0125.

Specificaties
Kenmerk Waarde
Connector Type ST-II
Single/Multimode Multimode
Maximum Cable Diameter 3mm
4 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
5,66
(excl. BTW)
6,85
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
€ 5,66
15 - 49
€ 5,26
50 +
€ 5,04
Related Products
ST to ST coupling receptacle adapters with 2.5 ...
Description:
ST to ST coupling receptacle adapters with 2.5 mm bayonet fixings and nickel plated zinc diecast body material. The ST to ST adapters are available with different alignment sleeve materials and modes:Stock number 782-7593 is Multimode and has a polymer ...
LC Duplex coupling adaptors with a multimode configuration ...
Description:
LC Duplex coupling adaptors with a multimode configuration for SC cut-out. These LC duplex coupling adaptors have a panel cut out of 13 x 9.5mm and a maximum panel thickness of 1.7mm. Stock number 788-4518 is flanged with a blue ...
Zirconium ceramic ferrules and sleevesOn-site assembly with standard ...
Description:
Zirconium ceramic ferrules and sleevesOn-site assembly with standard commercial toolsHexagonal crimp width: 4.52 x 10 mmPre-fabricated convex front face ensures short polishing times and excellent optical propertiesCoupling suitable for multimode and single mode Insertion loss at couplings: 0.2 dBInsertion loss ...
601 series fibre management interface units for splicing ...
Description:
601 series fibre management interface units for splicing and direct termination of ST and SC connections with multi-mode performance. These 601 series fibre management interface units are wall mounting with a lockable hinged front cover and allow access for patching ...