Molex LC to LC Multimode Fibre Optic Adapter

  • RS-stocknr. 775-4827
  • Fabrikantnummer 106121-0300
  • Fabrikant Molex
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Molex 8 Port LC Multimode Enhanced LC Adapter

LC multimode enhanced LC adapter with 8 ports that accept 8 simplex connectors, 4 duplex connectors or a combination of the two for flexible design. These 8 port LC multimode enhanced LC adapters have a 6 position tuning feature to optimize insertion loss performance, safety shutters for laser eye safety protection when the adapter is not fully populated, ceramic alignment sleeves and a snap mount, press to release latching design.
Stock number 775-4827 has an external shutter and a plastic housing
Stock number 775-4820 has an internal shutter and a plastic housing
Stock number 775-4824 has an external shutter and a zinc housing with EMI shielding.

Standards

Telecordia GR-326, TIA/EIA-604-10A (FOCIS-10) compliant

Specificaties
Kenmerk Waarde
Connector Type LC to LC
Single/Multimode Multimode
Colour Blue
Housing Material Polymer
Connector Type A LC
Connector Type B LC
114 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
44,59
(excl. BTW)
53,95
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 44,59
5 +
€ 43,25
Related Products
LC quad coupling adapter with a singlemode configuration. ...
Description:
LC quad coupling adapter with a singlemode configuration. This LC quad coupling adapter has a blue UL-V0 thermoplastic housing a ceramic alignment sleeve and is flanged with built-in retention clips to aid panel mounting. The panel cut-out for this LC ...
Zirconium ceramic ferrules and sleevesOn-site assembly with standard ...
Description:
Zirconium ceramic ferrules and sleevesOn-site assembly with standard commercial toolsHexagonal crimp width: 4.52 x 10 mmPre-fabricated convex front face ensures short polishing times and excellent optical propertiesCoupling suitable for multimode and single mode Insertion loss at couplings: 0.2 dBInsertion loss ...
601 series fibre management interface units for splicing ...
Description:
601 series fibre management interface units for splicing and direct termination of ST and SC connections with multi-mode performance. These 601 series fibre management interface units are wall mounting with a lockable hinged front cover and allow access for patching ...
Adapter to link cut and non-assembled fibresSuitable for ...
Description:
Adapter to link cut and non-assembled fibresSuitable for SM and MM 125 μm fibresIdeal for measurement purposes and temporary connections.