Harting Fibre Optic Connector, Polymer Optical Fibre (POF)

  • RS-stocknr. 843-8905
  • Fabrikantnummer 20100013221
  • Fabrikant HARTING
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

Han-Com®, Han D®, Han DD® and Han® E Crimp Contacts

A range of high quality turned crimp contacts for Han-Com®, Han D®, Han DD® and Han® E inserts. The appropriate parallel action crimp to tool is also available for optimum crimp quality, as is the appropriate service crimp tool.

Features & Benefits

• The parallel action crimp tool offers optimal crimp quality and features a rotating locator. See stock number 114-7706.
• For service and small assembly, the service crimp tool is offered complete with locator. See stock number 313-6607.

Product Application Information

The Han-Com combination connectors are industrial connectors designed for providing power and signal contacts in one insulation body. The Han-Q Series are connector inserts with a compact design, while the Han D/DD/DDD series are connectors built for high pin count interconnect applications.

Note

Han-Com® inserts have mixed power and signal formats. A typical identifier is ’4//2’ which means there are 4 power contacts and 2 signal contacts. The current rating is different for each type of contact within a particular insert.

Approvals

UL, CSA, SEV

Han-Com® Signal & Power (Crimp and Screw)

These Han- Com® inserts are available in current ratings from 10A to 100A. They are intended for use typically with hoods and housings; RS stock Nos. 181-0561, 181-0741, 181-0785, 363-8535, 363-8585 and their associated ranges. These hood and housing ranges are associated to a specific Harting 'Size' number identifier

Warning

  • These connectors should not be mated or unmated under electrical load. Connectors of the same or different types arranged in a line should be polarised to prevent the possibility of wrong connection.
Specificaties
Kenmerk Waarde
Series HAN 108DD, HAN 144DD, HAN 216DD, HAN 24DD, HAN 42DD, HAN 72DD
Jacket Diameter 3.7mm
Optical Fibre Type Polymer Optical Fibre (POF)
20 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Pack of 10)
15,577
(excl. BTW)
18,848
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 40
€ 15,577
€ 155,77
50 - 90
€ 13,241
€ 132,41
100 - 140
€ 11,683
€ 116,83
150 +
€ 10,126
€ 101,26
*prijsindicatie
Related Products
PIDG (Pre-Insulated Diamond Grip) spade tongue wire crimp ...
Description:
PIDG (Pre-Insulated Diamond Grip) spade tongue wire crimp terminals designed for uniform reliability in the most difficult circuit environments. These PIDG spade tongue terminals consist of a precision-formed high conductivity copper body and barrel. The wire barrel is surrounded with ...
ST I polymer body connectors and ST II ...
Description:
ST I polymer body connectors and ST II metal body connectors with ceramic precision ferrule for multimode fibres. External diameter 125 μm or 140 μm, 2.8-mm cable.An adapter nipple is supplied for mounting bare fibres.Plug indexing.Completely compatible with equivalent ST ...
FC connector with metal one-piece body and precision ...
Description:
FC connector with metal one-piece body and precision ceramic end fitting, for multimode fibres of external diameter 125 μm nominal, cabled, 2.8 m.Plug indexing; screw lock.Fully compatible with NTT standard.
From CLIFF Electronics, this optical transmitter jack conforms ...
Description:
From CLIFF Electronics, this optical transmitter jack conforms to EIAJ standard CP-1201, and is designed for digital audio interfaces, including fibre-optic connections. Designed for high quality audio applications, the transmitter has high speed signal receiving and is virtually unaffected by ...