- RS-stocknr.:
- 154-154
- Fabrikantnummer:
- FF-ZS 12015
- Fabrikant:
- 3M
9 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
285 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk
€ 21,76
(excl. BTW)
€ 26,33
(incl. BTW)
Aantal stuks | Per stuk |
1 - 9 | € 21,76 |
10 - 24 | € 20,92 |
25 + | € 20,01 |
- RS-stocknr.:
- 154-154
- Fabrikantnummer:
- FF-ZS 12015
- Fabrikant:
- 3M
Wetgeving en compliance
N.v.t.
- Land van herkomst:
- ES
Productomschrijving
Scotch-Brite™ Shaft Mounted Flap Brush FF-ZS, 75 mm x 45 mm
Scotch-Brite™ Shaft Mounted Flap Brushes are made of flaps of non-woven material mounted on a spindle.
Use Scotch-Brite™ Shaft Mounted Flap Brush to give a fine uniform finish to a variety of metal work pieces, without leaving chatter marks. The fine, matt scratch pattern offered by our shaft mounted flap brushes results in a finer finish compared to a combi wheel.
Features and Benefits
With a fine, matt scratch pattern that produces a finer finish than a combi wheel
Designed for use on all metals
Give a uniform finish to work pieces, without leaving chatter marks
Suitable for light deburring
Designed for use on all metals
Give a uniform finish to work pieces, without leaving chatter marks
Suitable for light deburring
Typical Applications
Give a fine uniform finish to a variety of metal work pieces
3M Very Fine Grade Flap Wheel, 75mm Diameter, 8,500rpm - Scotch-Brite Series - FF-ZS 12015
Mount this flap wheel from 3M to your spindle shaft to provide a smooth and glossy finish to your metal workpieces. It's made from non-woven material to enhance its abrasive quality when cleaning rust, blending imperfections and deburring. For ease of use, the wheel has a reinforced backing that's flexible yet durable enough for heavy-duty applications. Its maximum safe speed of 8,500rpm (rotations per minute) makes it a good choice for use in high-speed polishing applications. Use this flap wheel to create an even surface without any chatter marks.
Nylon abrasive material resists degradation even with constant use Very fine-grade thread for an extra smooth surface finish Compact diameter of 75mm makes it suitable for use on a spindle Matt-scratch pattern provides a large contact area for a fast removal rate and a smoother finish than a combi wheel
Applications
Factories Conveyor belts Agricultural equipment Industrial automation
What kinds of metal can I use this flap wheel with?
This flap wheel is designed for use with all metals, making it a versatile choice.
Specificaties
Kenmerk | Waarde |
---|---|
Bristle Material | Nylon |
Brush Type | Circular |
Diameter | 75mm |
Model | Scotch-Brite |
Maximum Safe Speed | 8500rpm |
- RS-stocknr.:
- 154-154
- Fabrikantnummer:
- FF-ZS 12015
- Fabrikant:
- 3M