KEMET Flat Cable Ferrite Core, 16 wires maximum, Split Core Type, Inner dimensions:25.4 x 2.6mm

  • RS-stocknr. 811-8897
  • Fabrikantnummer ESD-FPD-16
  • Fabrikant KEMET
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

ESD-FPD Series Split Cores with Metal Clamp

The ESD-FPD Series split cores are designed for use on flat cable in consumer electronics
This series features a stainless steel clamp and is available in a variety of sizes

Split Ferrite Rings

These split ferrite cores reduce the electromagnetic interference from being induced in or radiated from data and power cables. High attenuation ratings are achieved with the housing design and the special process steps during the ferrite manufacture. The special snap lock makes the ferrite sleeve suitable for use with a variety of cable diameters and once the split ferrite is locked it cannot be opened accidentally.The outer housing is designed to protect the halves of the core from breakage and ensures simple assembly on to cables that are already installed or which have been fitted with connectors. Fixing to the cable with glue or cable tie is optional. Typical applications for these split ferrite cores include data or power lines used in computer technology, terminals, industrial controllers, medical engineering and office machines.

Specificaties
Kenmerk Waarde
Maximum Number of Wires 16
Type Split Core
Application Consumer Electronics
Material Ferrite
Outer Dimensions 37 x 12.7 x 10mm
Inner Dimensions 25.4 x 2.6mm
Inner Height 2.6mm
Inner Width 25.4mm
Outer Depth 12.7mm
Outer Height 10mm
Outer Width 37mm
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
Related Products
Broad selection with guaranteed impedance specifications over a ...
Description:
Broad selection with guaranteed impedance specifications over a wide frequency range.
STAR-FLAT snap ferrite sleeves from Wurth Elektronik prevent ...
Description:
STAR-FLAT snap ferrite sleeves from Wurth Elektronik prevent cable crimping while integral cable fixing ensures that ribbon cables do not slide. STAR-FLAT snap ferrites guarantee electromagnetic compatibility as they can only be opened with the STAR-TEC key. Note, the safety ...
Wurth Elektronik WE – Flat Ferrite cores are ...
Description:
Wurth Elektronik WE – Flat Ferrite cores are designed to eliminate severe interference on ribbon cables in digital devices or display controllers. These ferrite sleeves Simply thread over the cable before connectors are applied, and are held in position with ...
Wurth Elektronik WE – Flat Ferrite cores are ...
Description:
Wurth Elektronik WE – Flat Ferrite cores are designed to eliminate severe interference on ribbon cables in digital devices or display controllers. These ferrite sleeves Simply thread over the cable before connectors are applied, and are held in position with ...