TE Connectivity 10 Way Flat Ribbon Cable, Series FLEXSTRIP, 25.4mm

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Jumper Leads

FLEXSTRIP® jumpers are multi-conductor board- to -board interconnect devices. They provide a convenient, reliable alternative to conventional point to point wiring for high density, high vibration PCB interconnections. Two types are available: those made from Nomex material are suitable for standard applications where changes of direct resistance due to humidity are not critical; those made from PTFE are ideal for high electrical and mechanical performance applications.

The product can be repeatably flexed without failure, reliable vibration- and break proof connection
No long preparation times for connecting PCBs, no cutting into sections, no preliminary work
Can be installed by most commonly used soldering techniques
High processsing speed,e.g soldering all the wiring points in the soldering bath simultaneously

Note

These jumpers are suitable for use with the FLEXSTRIP® sockets range

Specificaties
Kenmerk Waarde
Number of Ways 10
Pitch 2.54mm
American Wire Gauge 24
Reel Length 25.4mm
Voltage Rating 300 V
Hi-Flex Yes
Minimum Operating Temperature -40°C
Maximum Operating Temperature +150°C
High Density Yes
Characteristic Impedance 114 Ω
Capacitance 11.4 pF/ft
Series FLEXSTRIP
24 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
42 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
2,64
(excl. BTW)
3,19
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 2,64
Verpakkingsopties
Related Products
Description:
A range of IDC flat and flat to round cables directly suitable for IDC connectors. Parallel stranded tinned copper wire conductors, laminated between layers of blue PVC. Pitch between conductors 1.27 mm. One edge has a redstripe identifying the first ...
The 3365 series of grey ribbon cable, 28 ...
Description:
The 3365 series of grey ribbon cable, 28 awg wire on 0.05in. centres, permits mass termination to a broad line of 3M IDC connectors.,7x36 tinned stranded copper wire provides flexibility and extended product life. First conductor is identified by a ...
The 3302 series of 10 colour repeat clear ...
Description:
The 3302 series of 10 colour repeat clear carrier colour coded ribbon cable, 28 awg wire on 0·05in. centres, permits mass termination to a broad line of 3M IDC connectors.Stranded wire provides flexibility and extended product life.Insulation resistance >x109Ω/3m.
Ribbon cables provide a simple, quick and cost-effective ...
Description:
Ribbon cables provide a simple, quick and cost-effective solution to mass termination. They also have space and weight saving advantages over other wiring methods. They are therefore ideal for use on computers, peripherals, and interface units, audio and digital equipment. ...