Nexperia 74HCT74D Dual D Type Flip Flop IC, 14-Pin SOIC

  • RS-stocknr. 166-1291
  • Fabrikantnummer 74HCT74D
  • Fabrikant Nexperia
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

The 74HC74 and 74HCT74 are dual positive edge triggered D-type flip-flop. They have individual data (nD), clock (nCP), set (nSD) and reset (nRD) inputs, and complementary nQ and nQ outputs. Data at the nD-input, that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition, is stored in the flip-flop and appears at the nQ output. Schmitt-trigger action in the clock input, makes the circuit highly tolerant to slower clock rise and fall times.

Mixed 5 V and 3.3 V applications
Improved signal integrity with integrated termination resistors
High noise immunity
Flow through pin out for easy layout
Wide supply voltage range
Low propagation delay
Overvoltage tolerant input options
Integrated source termination resistor options
Bus hold options
Key applications
Frequency division
Controlled delays
Interface between asynchronous and synchronous systems

74HCT Family

Specificaties
Kenmerk Waarde
Logic Family HCT
Logic Function D Type
Input Type Single Ended
Output Signal Type Differential
Triggering Type Positive Edge
Polarity Inverting, Non-Inverting
Mounting Type Surface Mount
Package Type SOIC
Pin Count 14
Set/Reset Yes
Number of Elements per Chip 2
Maximum Propagation Delay Time @ Maximum CL 53 ns @ 4.5 V
Dimensions 8.75 x 4 x 1.45mm
Propagation Delay Test Condition 50pF
Maximum Operating Supply Voltage 5.5 V
Width 4mm
Height 1.45mm
Minimum Operating Supply Voltage 4.5 V
Length 8.75mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +125 °C
114 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
684 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Tube of 57)
0,245
(excl. BTW)
0,296
(incl. BTW)
Aantal stuks
Per stuk
Per tube*
57 +
€ 0,245
€ 13,965
*prijsindicatie
Related Products
A range of NXP Flip-Flops and Latches from ...
Description:
A range of NXP Flip-Flops and Latches from the 74HC Family of CMOS Logic ICs. The 74HC Family use silicon gate CMOS technology to achieve operating speeds similar to the LSTTL family but with the low power consumption of standard ...
Industry-standard Advanced Ultra-low Power (AUP) logic family products ...
Description:
Industry-standard Advanced Ultra-low Power (AUP) logic family products for ultra-low power consumption, small footprint logic solutions for use in 1.8 V and mixed 1.8 V / 3.3 V circuit applications. The AUP logic family offers the following features:. Wide supply ...
The 74HC74D is a high speed CMOS D ...
Description:
The 74HC74D is a high speed CMOS D FLIP FLOP fabricated with silicon gate C2MOS technology. It achieves the high speed operation similar to equivalent LSTTL while maintaining the CMOS low power dissipation. The signal level applied to the D ...
Texas Instruments range of Flip-Flops and Latches from ...
Description:
Texas Instruments range of Flip-Flops and Latches from the 74HCT Family of CMOS Logic ICs. Inputs of the 74HCT family are 74LSTTL compatible, and the products use silicon gate CMOS technology to achieve operating speeds similar to the LSTTL family ...