Var insertion depth V float switch,N/O

  • RS-stocknr. 211-985
  • Fabrikantnummer RSF64EXS
  • Fabrikant Cynergy3
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Variable Insertion Depth Vertical Float Switch

A vertical float switch with N/O or N/C switching action. Its overall depth and position can be adjusted.

N/O Version has Contacts Which are Open when the Tank is Empty, N/C Version has Contacts which are Closed when the Tank is Empty
Overall Depth can be Varied Between 150mm and 450mm by Adjusting its Position in a Sliding Clamp
Up to 3 Extension Units (306mm long) May Be Added to Provide Insertion Depths up to 1350mm (see accessories)
Temperature Range; 0 to 75°C
Switching Depth; 123-423mm
Electrical Life; 5 x 106 Operations
Polypropylene Float, PPS Stem and PVC Class 7 Tube Material

Note

211-985 - N/O Contact
348-8037 - N/C Contact

//media.rs-online.com/t_line/L211985-01.gif

Warning

  • The Cable entry point must NOT under any circumstances be submerged.
    On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside.
    On the vertical type the mounting thread and cable entry must be above the highest level of the liquid.
Specificaties
Kenmerk Waarde
Device Type Float
Mounting Type Vertical
Switch Output Direct Load
Body Material Polyphenylene Sulfide
Cable Length 1.5m
Minimum Operating Temperature 0°C
Maximum Operating Temperature +75°C
Maximum Current 600 mA
54 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
130 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
55,57
(excl. BTW)
67,24
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 55,57
5 - 9
€ 53,85
10 +
€ 52,10
Related Products
A reusable, compact leak detection switch that is ...
Description:
A reusable, compact leak detection switch that is ideal for use with double wall tanks, containment sumps and double wall pipes. The LS-10 uses dry switching for increased reliability and is easy to clean and reinstall after being triggered. The ...
The Cynergy3 MS series of float switches are ...
Description:
The Cynergy3 MS series of float switches are designed for large tanks, cisterns or reservoirs, and can be installed on submersible pumps. The MS float switches are capable of reaching 100m in depth. MS float switches come with a 5m ...
Side mounting switches consisting of a reed switch ...
Description:
Side mounting switches consisting of a reed switch and pivoted actuator magnet encapsulated in a waterproof housing. Can be used for 'normally open' or 'normally closed' operation, depending on orientationAll units WBS approved, product for use in hot and cold ...
A unique design switch which keeps the pivot ...
Description:
A unique design switch which keeps the pivot area free from the fluid making them ideal for use in hot drink vending machines etc. Drop float types for monitoring upper level and extended drop float types for monitoring lower level ...