Polypropylene V floatswitch w/gasket,N/O

  • RS-stocknr. 845-960
  • Fabrikantnummer RSF54Y100JC
  • Fabrikant Cynergy3
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Cynergy3 RSF50 Series Float Switches

Cynergy3 RSF50 float switches are compact devices suitable for vending machines printing system and chemical dosing equipment, for example. RSF50 float switches are vertically mounted and feature a single switch.
There is a range of different material options available within the RSF50 series so you will be sure to find a suitable float switch for more commonly used liquids.
The direction of the switch can be reversed by firstly removing the float, inverting the switch and re-fitting it to the stem.

Within the series there are 5 ranges:
RSF53 (black) - Nylon
RSF54 (opaque) - Polypropylene (WRAS approved)
RSF56 (grey) - Polyphenylene Sulphide (PPS)
RSF57 (green) - Polyvinylidene Fluoride (PVDF)
RSF58 (white) - Polypropylene (UL approved)
Note - the different ranges feature other differences. Please refer to the Datasheet for more information on technical specifications.

What contact types are there?
The RSF50 float switches can be configured for N/O (Normally Open) or N/C (Normally Closed) operation.

What mounting thread does it have?
RSF50 float switches have either M12 or 1/8” NPT mounting thread. This is depicted by the last part of the part number. If it ends in “B” or “C”, it is an M12. If it ends in “1/8” it is 1/8” NPT.

Note

Part numbers ending in '1/8' have a 1/8"NPT mounting thread
Part numbers ending in 'C' have an M12 mounting thread

Supplied with

epoxy sealed leadouts

Warning

  • The cable entry point must NOT under any circumstances be submerged.
    On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside.
    On the Vertical type the mounting thread and cable entry must be above the highest level of the liquid.
Specificaties
Kenmerk Waarde
Device Type Float
Mounting Type Vertical
Switch Output NO/NC
Body Material Polypropylene
Cable Length 1m
Minimum Operating Temperature -20°C
Maximum Operating Temperature +100°C
Maximum Current 600 mA
Gasket Material Nitrile
Series RSF50
251 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1020 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
18,29
(excl. BTW)
22,13
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 18,29
5 - 9
€ 17,73
10 +
€ 17,15
Related Products
Cynergy3 offers wide range of horizontal switches which ...
Description:
Cynergy3 offers wide range of horizontal switches which are WRAS approved and have low-cost compact design. These horizontal float switches consist of a reed switch and a pivoted actuator magnet and can be used for N/O or N/C operation. The ...
The LS-3 Series of Gems sensors level switches. ...
Description:
The LS-3 Series of Gems sensors level switches. Ideal for shallow tanks or restricted spaces, or for any low-cost, high volume use. Easy to install, the LS-3 can be used either way up and is easy switched between normally closed ...
Side mounting switches consisting of a reed switch ...
Description:
Side mounting switches consisting of a reed switch and pivoted actuator magnet encapsulated in a waterproof housing. Can be used for 'normally open' or 'normally closed' operation, depending on orientationAll units WBS approved, product for use in hot and cold ...
The Cynergy3 MS series of float switches are ...
Description:
The Cynergy3 MS series of float switches are designed for large tanks, cisterns or reservoirs, and can be installed on submersible pumps. The MS float switches are capable of reaching 100m in depth. MS float switches come with a 5m ...