S/steel horizontal mount floatswitch,50W

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Stainless Steel, Vertical Float Switch – Horizontal Mount

Horizontal mount with right angled stem
SPST output
Internal vessel mounting
Float reversal, rise or fall operate
Top or bottom tank mounting
Silicone sealing washer
Maximum pressure: 10 bar Kg/cm2
Cable: XLPE, AWG22
Contact resistance: 200mΩ
Clearance hole diameter: 10mm

Warning

  • The Cable entry point must NOT under any circumstances be submerged.
    On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside.
    On the vertical type the mounting thread and cable entry must be above the highest level of the liquid.
Specificaties
Kenmerk Waarde
Device Type Float
Mounting Type Horizontal
Switch Output Direct Load
Body Material Stainless Steel
Cable Length 300mm
Minimum Operating Temperature -10°C
Maximum Operating Temperature +120°C
Maximum AC Voltage 300V
Maximum DC Voltage 300V
Maximum Current 500 mA
Maximum Pressure 10bar
53 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
83 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
78,53
(excl. BTW)
95,02
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 78,53
5 - 9
€ 76,12
10 +
€ 73,65
Related Products
Stainless steel mounts for the MST cable tie ...
Description:
Stainless steel mounts for the MST cable tie range. 2 way fixingHigh performance stainless steel 316 materialslot width 10mmSingle 4mm, 5mm or 6mm fixing holeHeavy duty designRobust and durable solutionResistant to various materials and conditionsEasy quick installationSafe and secure solution ...
Float Switches from Pepperl + Fuchs. Designed with ...
Description:
Float Switches from Pepperl + Fuchs. Designed with a highly buoyant ball and to be used with any sequential circuit, because of the buoyancy it is ideally suited to low density liquids. The switch element is mercury free. The float ...
Submerged type float switch for sewer and industrial ...
Description:
Submerged type float switch for sewer and industrial waste systems and turbulent industrial fluids. Self cleaning switching element with 10 amp contacts, this makes the switch insensitive to condensation and humidity caused by fluctuations in temperature. Rounded moulding to prevent ...
Miniature horizontally mounted float switches that can be ...
Description:
Miniature horizontally mounted float switches that can be fitted internally to the side of the tank. 304 grade stainless steel construction makes them ideally suited for use in aggressive environments. Internal Mounting Version Requiring Access to Inside of TankMiniature Design ...