PPS V float switch w/ETFE cable,0.5m N/O

  • RS-stocknr. 288-9344
  • Fabrikantnummer RSF56Y050TB
  • Fabrikant Cynergy3
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Cynergy3 RSF50 Series Float Switches

Cynergy3 RSF50 float switches are compact devices suitable for vending machines printing system and chemical dosing equipment, for example. RSF50 float switches are vertically mounted and feature a single switch.
There is a range of different material options available within the RSF50 series so you will be sure to find a suitable float switch for more commonly used liquids.
The direction of the switch can be reversed by firstly removing the float, inverting the switch and re-fitting it to the stem.

Within the series there are 5 ranges:
RSF53 (black) - Nylon
RSF54 (opaque) - Polypropylene (WRAS approved)
RSF56 (grey) - Polyphenylene Sulphide (PPS)
RSF57 (green) - Polyvinylidene Fluoride (PVDF)
RSF58 (white) - Polypropylene (UL approved)
Note - the different ranges feature other differences. Please refer to the Datasheet for more information on technical specifications.

What contact types are there?
The RSF50 float switches can be configured for N/O (Normally Open) or N/C (Normally Closed) operation.

What mounting thread does it have?
RSF50 float switches have either M12 or 1/8” NPT mounting thread. This is depicted by the last part of the part number. If it ends in “B” or “C”, it is an M12. If it ends in “1/8” it is 1/8” NPT.

Note

Part numbers ending in '1/8' have a 1/8"NPT mounting thread
Part numbers ending in 'C' have an M12 mounting thread

Supplied with

epoxy sealed leadouts

Warning

  • The cable entry point must NOT under any circumstances be submerged.
    On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside.
    On the Vertical type the mounting thread and cable entry must be above the highest level of the liquid.
Specificaties
Kenmerk Waarde
Device Type Float
Mounting Type Vertical
Switch Output NO/NC
Body Material Polyphenylene Sulfide
Cable Length 500mm
Minimum Operating Temperature -20°C
Maximum Operating Temperature +120°C
Maximum AC Voltage 240V
Maximum DC Voltage 120V
Maximum Current 600 mA
Gasket Material Silicone, Viton
Series RSF50
Current Rating 600 mA
10 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
90 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
22,67
(excl. BTW)
27,43
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 22,67
5 - 9
€ 21,97
10 +
€ 21,25
Related Products
The LS-3 Series of Gems sensors level switches. ...
Description:
The LS-3 Series of Gems sensors level switches. Ideal for shallow tanks or restricted spaces, or for any low-cost, high volume use. Easy to install, the LS-3 can be used either way up and is easy switched between normally closed ...
A range of Cynergy3 single switching point, vertical ...
Description:
A range of Cynergy3 single switching point, vertical fluid level switches. These level switches can be mounted on the top or bottom of the tank but requires access to the tanks interior. Vertical level switches offer long-term reliability and minimal ...
RSF50 series are compact vertically mounted devices with ...
Description:
RSF50 series are compact vertically mounted devices with a single switchpoint. Mounting is either from the top or bottom of a tank from the inside, so requires access to the inside of the tank. Typical applications include vending machines, printing ...
The RS PRO float switch is designed for ...
Description:
The RS PRO float switch is designed for RSF mounting through the wall of a tank, via NPT thread without requiring access inside the tank. This switch can be fitted to achieve either make on rise (N/O) or make on ...