Float Switch Horizl Int Mnt 100W PPS

  • RS-stocknr. 725-9830
  • Fabrikantnummer RSF46H050TG
  • Fabrikant Cynergy3
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Cynergy3 Horizontal Float Switches

Cynergy3 offers wide range of horizontal switches which are WRAS approved and have low-cost compact design. These horizontal float switches consist of a reed switch and a pivoted actuator magnet and can be used for N/O or N/C operation. The switch action can be reversed by mounting the float switch with the float able to move upwards away from the body instead of downwards.

WRAS approval explained

WRAS is the standard against waste, misuse, undue consumption or contamination of the water supply and must have an appropriate quality and standard.

What materials can you choose from?

• Nylon
• Polypropylene
• Polypropylene Sulfide (PPS)

Features and Benefits

• Operating temperature: -10 °C to +120 °C
• N/O or N/C Switch output
• Switch action may be reversed by rotating the switch through 180º
• Choice of gasket materials: Silicone, Nitrile, Viton or combination of Silicone & Nitrile
• Flying Lead
• M12 plug connection
• Internal & external fitting inside a tank
UL recognised

Typical Applications

These Cynergy3 Horizontal Switches are most likely to be used in vending machines, commercial washing machines and evaporator units.

Note

Suitable for signal switching and for use with transistorised input/low power, suppressed coil miniature relays. Not suited for any inductive or inrush (e.g. filament lamps) loads.

This float switch is designed for internal fitting inside a tank. The floatswitch is fitted in a 16.5 mm dia. hole in the tank from the inside and secured by a nylon nut on the outside

PPS materialInternal mounting50cm EFTE flying leads

Product Application Information

This PPS float switch is suitable for use in most organic and inorganic chemicals and most oils. Typical applications include vending machines, commercial washing machines and evaporator units.

Specificaties
Kenmerk Waarde
Device Type Float
Mounting Type Horizontal Internal
Switch Output NO/NC
Body Material Polyphenylene Sulfide
Cable Length 500mm
Minimum Operating Temperature -10°C
Maximum Operating Temperature +120°C
Maximum Current 600 mA
Gasket Material Nitrile
Series RSF40
20 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
26,81
(excl. BTW)
32,44
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 26,81
5 - 9
€ 25,99
10 +
€ 25,13
Related Products
Cynergy3 RSF50 float switches are compact devices suitable ...
Description:
Cynergy3 RSF50 float switches are compact devices suitable for vending machines printing system and chemical dosing equipment, for example. RSF50 float switches are vertically mounted and feature a single switch.There is a range of different material options available within the ...
The LS-3 Series of Gems sensors level switches. ...
Description:
The LS-3 Series of Gems sensors level switches. Ideal for shallow tanks or restricted spaces, or for any low-cost, high volume use. Easy to install, the LS-3 can be used either way up and is easy switched between normally closed ...
The RS PRO float switch requires access to ...
Description:
The RS PRO float switch requires access to the inside area of the tank. The switch action may be reversed by rotating the device through 180°. Cable sets with M12 plugs are also available. • Body is Made of nylon• ...
Cynergy3 RSF50 float switches are compact devices suitable ...
Description:
Cynergy3 RSF50 float switches are compact devices suitable for vending machines printing system and chemical dosing equipment, for example. RSF50 float switches are vertically mounted and feature a single switch.There is a range of different material options available within the ...