Sensata/Cynergy 3 RSF80 Series Horizontal External Polyphenylene Sulfide Float Switch, Float, 1m Cable, NO/NC, 240V ac
- RS-stocknr.:
- 725-9868
- Fabrikantnummer:
- RSF86Y050T
- Fabrikant:
- Sensata / Cynergy3
11 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
46 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk
€ 26,20
(excl. BTW)
€ 31,70
(incl. BTW)
Aantal stuks | Per stuk |
1 - 4 | € 26,20 |
5 - 9 | € 25,39 |
10 + | € 24,55 |
- RS-stocknr.:
- 725-9868
- Fabrikantnummer:
- RSF86Y050T
- Fabrikant:
- Sensata / Cynergy3
Wetgeving en compliance
- Land van herkomst:
- GB
Productomschrijving
Cynergy3 Horizontal Float Switches
Cynergy3 offers wide range of horizontal switches which are WRAS approved and have low-cost compact design. These horizontal float switches consist of a reed switch and a pivoted actuator magnet and can be used for N/O or N/C operation. The switch action can be reversed by mounting the float switch with the float able to move upwards away from the body instead of downwards.
WRAS approval explained
WRAS is the standard against waste, misuse, undue consumption or contamination of the water supply and must have an appropriate quality and standard.
What materials can you choose from?
Nylon
Polypropylene
Polypropylene Sulfide (PPS)
Polypropylene
Polypropylene Sulfide (PPS)
Features and Benefits
Operating temperature: -10 °C to +120 °C
N/O or N/C Switch output
Switch action may be reversed by rotating the switch through 180º
Choice of gasket materials: Silicone, Nitrile, Viton or combination of Silicone & Nitrile
Flying Lead
M12 plug connection
Internal & external fitting inside a tank
UL recognised
N/O or N/C Switch output
Switch action may be reversed by rotating the switch through 180º
Choice of gasket materials: Silicone, Nitrile, Viton or combination of Silicone & Nitrile
Flying Lead
M12 plug connection
Internal & external fitting inside a tank
UL recognised
Typical Applications
These Cynergy3 Horizontal Switches are most likely to be used in vending machines, commercial washing machines and evaporator units.
Note
Suitable for signal switching and for use with transistorised input/low power, suppressed coil miniature relays. Not suited for any inductive or inrush (e.g. filament lamps) loads.
Sensata Cynergy3 Horizontal External Float Switch, 1m Cable, Polyphenylene Sulfide - RSF80 Series - RSF86Y050T
Monitor the liquid levels in your tank effectively with this float switch from Sensata's Cynergy3. This component lets you know exactly how much liquid is inside an industrial tank and alerts you when liquid levels are high or low. The switch floats on the surface of the liquid and turns your circuit on or off when the levels rise or fall. This helps you reliably prevent overflow when filling a tank and lets you know when it needs to be refilled. You'll often find a component like this used in applications involving evaporators or washing machines.
Features & Benefits
• Horizontal switch can mount on the sides of tanks with no top or bottom access
• Ample 1m cable length for flexible reach inside a large industrial tank
• Maximum current capacity of 600mA (milliamperes) keeps device at low power levels for energy efficiency
• Dense polyphenylene sulfide (PPS) body material provides effective electrical insulation for greater safety
• Ample 1m cable length for flexible reach inside a large industrial tank
• Maximum current capacity of 600mA (milliamperes) keeps device at low power levels for energy efficiency
• Dense polyphenylene sulfide (PPS) body material provides effective electrical insulation for greater safety
Can this float switch withstand harsh industrial environments?
Yes, this float switch has a wide operating temperature range of -10°C to +100°C, making it suitable for use in hot or cold liquids and environments.
Specificaties
Kenmerk | Waarde |
---|---|
Device Type | Float |
Mounting Type | Horizontal External |
Switch Output | NO/NC |
Body Material | Polyphenylene Sulfide |
Cable Length | 1m |
Minimum Operating Temperature | -10°C |
Maximum Operating Temperature | +120°C |
Maximum AC Voltage | 240V |
Maximum DC Voltage | 120V |
Maximum Current | 600 mA |
Series | RSF80 |
Standards Met | NSF Approved, WRAS |