Float Switch Horizontal Ext Mount UL

  • RS-stocknr. 725-9943
  • Fabrikantnummer RSF78Y100RN
  • Fabrikant Cynergy3
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Cynergy3 Horizontal Float Switches

Cynergy3 offers wide range of horizontal switches which are WRAS approved and have low-cost compact design. These horizontal float switches consist of a reed switch and a pivoted actuator magnet and can be used for N/O or N/C operation. The switch action can be reversed by mounting the float switch with the float able to move upwards away from the body instead of downwards.

WRAS approval explained

WRAS is the standard against waste, misuse, undue consumption or contamination of the water supply and must have an appropriate quality and standard.

What materials can you choose from?

• Nylon
• Polypropylene
• Polypropylene Sulfide (PPS)

Features and Benefits

• Operating temperature: -10 °C to +120 °C
• N/O or N/C Switch output
• Switch action may be reversed by rotating the switch through 180º
• Choice of gasket materials: Silicone, Nitrile, Viton or combination of Silicone & Nitrile
• Flying Lead
• M12 plug connection
• Internal & external fitting inside a tank
UL recognised

Typical Applications

These Cynergy3 Horizontal Switches are most likely to be used in vending machines, commercial washing machines and evaporator units.

Note

Suitable for signal switching and for use with transistorised input/low power, suppressed coil miniature relays. Not suited for any inductive or inrush (e.g. filament lamps) loads.

This float switch is designed for fitting through a tank wall from the outside where access to the internal fitting is not possible. The float switch is fitted in a 23 mm dia. hole in the tank from the outside and secured by a compression seal with a backnut.

PP material
External mounting
Compression seal
100cm PVC flying lead

Product Application Information

This PP float switch is most suitable for use in water, detergents, vegetable oils, some organic and inorganic chemicals. Typical applications include vending machines, commercial dishwashers and auxiliary tanks on vehicles

Specificaties
Kenmerk Waarde
Device Type Float
Mounting Type Horizontal External
Switch Output NO/NC
Body Material Polypropylene
Cable Length 1m
Minimum Operating Temperature -20°C
Maximum Operating Temperature +100°C
Maximum Current 600 mA
Gasket Material Nitrile
Series RSF70
25 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
69 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
17,96
(excl. BTW)
21,73
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 17,96
5 - 9
€ 17,40
10 +
€ 16,83
Related Products
Cynergy3 offers wide range of horizontal switches which ...
Description:
Cynergy3 offers wide range of horizontal switches which are WRAS approved and have low-cost compact design. These horizontal float switches consist of a reed switch and a pivoted actuator magnet and can be used for N/O or N/C operation. The ...
Horizontal mount with right angled stemSPST outputInternal vessel ...
Description:
Horizontal mount with right angled stemSPST outputInternal vessel mountingFloat reversal, rise or fall operateTop or bottom tank mountingSilicone sealing washerMaximum pressure: 10 bar Kg/cm2Cable: XLPE, AWG22Contact resistance: 200mΩClearance hole diameter: 10mm.
Cynergy3 offers wide range of horizontal switches which ...
Description:
Cynergy3 offers wide range of horizontal switches which are WRAS approved and have low-cost compact design. These horizontal float switches consist of a reed switch and a pivoted actuator magnet and can be used for N/O or N/C operation. The ...
SH-3 Series horizontal float switches from Cynergy 3 ...
Description:
SH-3 Series horizontal float switches from Cynergy 3 feature a pivoted float arm. Different switching options are available by using either a reed switch or a microswitch. The SH-3 float switches are made with an aluminium enclosure with a screw ...