Switch, Dual 50/100mm, NC/NC

  • RS-stocknr. 756-4201
  • Fabrikantnummer SSF67B50B100
  • Fabrikant Cynergy3
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TW
Productomschrijving

Dual Position Stainless Steel Float Switch

Designed to give the user a number of switching options to cater for a variety of system requirements. These switches are most suited for use with aggressive liquids and hygienic applications.

Two Independent Switching Points
Lower Float Make on Fall, and Upper Float Make on Rise
Minimum Fluid SG: 0.80
Switch Differential (each level) Nominal: 1mm
Suitable for High and Low Level Alarm and Control Signal
Stainless Steel 316L for Use with Aggressive Liquids, or in Hygienic Applications
Vertical Mounting, M16 x 2 Thread
Temperature Range: -20 to +135°C
Nitrile Gasket
’Safe Area’ for Use in Petrochemical, Storage, and Process Control Applications

Note

All ratings in tech. spec. table are for resistive loads only

Warning

  • The Cable entry point must NOT under any circumstances be submerged.
    On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside.
    On the vertical type the mounting thread and cable entry must be above the highest level of the liquid.
Specificaties
Kenmerk Waarde
Device Type Float
Mounting Type Vertical
Switch Output NO/NC
Body Material Stainless Steel
Cable Length 1m
Minimum Operating Temperature -20°C
Maximum Operating Temperature +135°C
Maximum Current 600 mA
Maximum Pressure 10bar
Gasket Material Nitrile
Series SSF67
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
188,03
(excl. BTW)
227,52
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 188,03
Related Products
A reusable, compact leak detection switch that is ...
Description:
A reusable, compact leak detection switch that is ideal for use with double wall tanks, containment sumps and double wall pipes. The LS-10 uses dry switching for increased reliability and is easy to clean and reinstall after being triggered. The ...
Reliable & robust mercury-free Sump Float switch designed ...
Description:
Reliable & robust mercury-free Sump Float switch designed for use within applications which activate electrical components. Switch-tek LV41 series enables applications to autonomously start and stop. Float switches of this mercury-free design are universally used within pump automation applicationsHigh quality ...
Reliable & robust mercury-free Sump Float switch designed ...
Description:
Reliable & robust mercury-free Sump Float switch designed for use within applications which activate electrical components. Switch-tek LV41 series enables applications to autonomously start and stop. Float switches of this mercury-free design are universally used within pump automation applicationsHigh quality ...
A stainless steel vertical float switch fitted with ...
Description:
A stainless steel vertical float switch fitted with an acrylic guard to help prevent against accidental operation caused by turbulent fluids. The float switch can be bought with an extra test facility allowing the float to be manually lifted to ...