Switch, Dual 25/175mm, NO/NC, M12 conn

  • RS-stocknr. 756-4242
  • Fabrikantnummer RSF66A25B175P
  • Fabrikant Cynergy3
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Cynergy3 Float Switch

The Cynergy3 RSF66P series float switch is a vertical mount type and has NO/NC output configuration. This float switch has a polyphenylene sulphide body. The switch has an upper level is 30mm and the lower level is 175mm. It is designed for several switching options to meet a variety of system requirements. The dual float versions can be used for controlling the filling or emptying of tanks via electromechanical relays. It is used for high and low-level switching.

Features and Benefits

Minimum fluid SG is 0.85
M12, 4-pin connection for quick connection to circuit
Operating temperature ranges between -10°C and 85°C
Total length is 202mm
Maximum switching power is 25VA

Certifications

WRAS approved
NSF approved
UL listed

Specificaties
Kenmerk Waarde
Device Type Float
Mounting Type Vertical
Switch Output NO/NC
Body Material Polyphenylene Sulfide
Minimum Operating Temperature -10°C
Maximum Operating Temperature +85°C
Maximum Current 600 mA
Gasket Material Nitrile
Series RSF66P
Sorry, we konden onze voorraadniveaus nu niet controleren. Probeer de pagina te vernieuwen.
Prijs Each
43,48
(excl. BTW)
52,61
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 43,48
5 - 9
€ 42,14
10 +
€ 40,76
Related Products
The RS PRO float switch is designed for ...
Description:
The RS PRO float switch is designed for RSF mounting through the wall of a tank, via NPT thread without requiring access inside the tank. The switch can be fitted to achieve either make on rise (N/O) or make on ...
The RS PRO pedestal mount float switch has ...
Description:
The RS PRO pedestal mount float switch has 2 NC DPST-Db contacts. It is used for an open tank or sump. The float switch has a vertical operating position. • Made of polypropylene• Maximum AC voltage is 230V (Single Phase), ...
The RS PRO 600mA internal mounting float switch ...
Description:
The RS PRO 600mA internal mounting float switch has a total length of 202mm and a maximum switching voltage of 240VAC/120VDC. It has a polyphenylene sulphide body and nitrile gasket. The dual float version can be used for controlling the ...
The Cynergy3 RFS10 series drop float switch is ...
Description:
The Cynergy3 RFS10 series drop float switch is designed to eliminate the problems associated with limescale build-up around the pivot point of the conventional float switch. It has an electrical rating of 240VAC and 0.6A. This particular series is primarily ...