FS PPS n/o 25VA M12 plug

  • RS-stocknr. 869-7573
  • Fabrikantnummer RSF46YFP
  • Fabrikant Cynergy3
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Cynergy3 Horizontal Float Switches

Cynergy3 offers wide range of horizontal switches which are WRAS approved and have low-cost compact design. These horizontal float switches consist of a reed switch and a pivoted actuator magnet and can be used for N/O or N/C operation. The switch action can be reversed by mounting the float switch with the float able to move upwards away from the body instead of downwards.

WRAS approval explained

WRAS is the standard against waste, misuse, undue consumption or contamination of the water supply and must have an appropriate quality and standard.

What materials can you choose from?

• Nylon
• Polypropylene
• Polypropylene Sulfide (PPS)

Features and Benefits

• Operating temperature: -10 °C to +120 °C
• N/O or N/C Switch output
• Switch action may be reversed by rotating the switch through 180º
• Choice of gasket materials: Silicone, Nitrile, Viton or combination of Silicone & Nitrile
• Flying Lead
• M12 plug connection
• Internal & external fitting inside a tank
UL recognised

Typical Applications

These Cynergy3 Horizontal Switches are most likely to be used in vending machines, commercial washing machines and evaporator units.

Note

Suitable for signal switching and for use with transistorised input/low power, suppressed coil miniature relays. Not suited for any inductive or inrush (e.g. filament lamps) loads.

This float switch is designed for internal fitting inside a tank. The float switch is fitted in a 16.5 mm dia. hole in the tank from the inside and secured by a nylon nut on the outside

PPS material
Internal mounting
M12 connection
WRAS approved

Product Application Information

This PPS float switch is suitable for use in most organic and inorganic chemicals and most oils. Typical applications include vending machines, commercial washing machines and evaporator units.

Specificaties
Kenmerk Waarde
Device Type Float
Mounting Type Horizontal
Switch Output NO/NC
Body Material Polyphenylene Sulfide
Minimum Operating Temperature -10°C
Maximum Operating Temperature +120°C
Maximum AC Voltage 240V
Maximum DC Voltage 120V
Maximum Current 600 mA
Gasket Material Nitrile
Series RSF40
Standards Met WRAS
16 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
38 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
21,43
(excl. BTW)
25,93
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 21,43
5 - 9
€ 20,78
10 +
€ 20,08
Related Products
Cynergy3 horizontal float switches are compact in size ...
Description:
Cynergy3 horizontal float switches are compact in size and available in a range of materials and gasket choices to suit a broad range of applications. Horizontal level switches offer long-term reliability from a simple and trusted design that requires no ...
A range of Cynergy3 single switching point, vertical ...
Description:
A range of Cynergy3 single switching point, vertical fluid level switches. These level switches can be mounted on the top or bottom of the tank but requires access to the tanks interior. Vertical level switches offer long-term reliability and minimal ...
Cynergy3 horizontal float switches are compact in size ...
Description:
Cynergy3 horizontal float switches are compact in size and available in a range of materials and gasket choices to suit a broad range of applications. Horizontal level switches offer long-term reliability from a simple and trusted design that requires no ...
The RS PRO float switch is a vertically ...
Description:
The RS PRO float switch is a vertically mounted device with a single switch point. The body material of the switch is polypropylene. The switch action may be reversed by removing the float, inverting it and then refitting to the ...