Floor Standing Enclosure, Single Door, Steel, Grey, 1800 x 600 x 400mm IP55 Spacial SM

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: ES
Productomschrijving

Spacial SM Monobloc Enclosures

The Spacial SM compact metal enclosure is made up of a compact body, welded rear panel and front part forming a rigid frame with its corners welded.

Four deep supports, 2 at the top and 2 at the bottom, for adjusting the equipment fixing bracket with a pitch of 25 mm
Sheet steel door, painted with epoxy polyester resin in textured RAL7035 grey
Reinforcement frame made up of two perforated uprights with a pitch of 25mm and two door rails (height-adjustable), which can be used for fixing cables
Standard locking system with handle and 5mm double bar insert
Supplied with galvanised mounting plate and 4 support brackets
Cable gland plate in 2 parts
IP55 according to IEC 60529
IK10 according to IEC62262
Certifications: BV, DNV, UL and cUL

Steel Floor Standing Enclosures

Specificaties
Kenmerk Waarde
Number of Doors 1
IP Rating IP55
Series Spacial SM
Door Type Opaque
Construction Type Welded
Body Material Steel
Colour Grey
External Dimensions 1800 x 600 x 400mm
External Depth 400mm
External Height 1800 mm
External Width 750 mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 20-11-2019, met een levertijd van 2 à 3 werkdagen.
Prijs Each
695,04
(excl. BTW)
841,00
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 695,04
Related Products
The Thalassa PLD enclosure is designed to accommodate ...
Description:
The Thalassa PLD enclosure is designed to accommodate busbars and 3 pole DIN block fuses in energy distribution applications. IP43 (IEC529)GRP enclosures resistant to impact, temperature and corrosion3-point locking door system (keylock not included), opens to 90° (lift-off hinges allow ...
The body of the SE8 floor standing enclosure ...
Description:
The body of the SE8 floor standing enclosure consists of two side panels and a roof made from a single piece of sheet steel, unlike bayed enclosure suites that have frames and removable side panels. The rear panel of the ...
The KS series from Rittal is a fibreglass-reinforced ...
Description:
The KS series from Rittal is a fibreglass-reinforced polyester enclosure with a dyed plastic finish similar to RAL 7035. It has a twin seal on the top and bottom edges of the door that act as integral rain protection strips. ...
The Spacial SM compact metal enclosure is made ...
Description:
The Spacial SM compact metal enclosure is made up of a compact body, welded rear panel and front part forming a rigid frame with its corners welded. Four deep supports, 2 at the top and 2 at the bottom, for ...