Parker, 2 → 150 L/min Flow Transducer, Cable Plug, Pulse, 24 V dc

  • RS-stocknr. 285-790
  • Fabrikantnummer DFT.980.RS
  • Fabrikant Parker
Datasheets
Wetgeving en compliance
N.v.t.
Productomschrijving
//media.rs-online.com/t_line/LD257026-01.gif
//media.rs-online.com/t_line/LI257026-01.gif

Parker Liquid Flow Transducer

The Parker liquid flow transducer is designed to operate with most of the liquids. It provides a pulse output proportional to the flow rate. This is factory calibrated (2L/min to 150L/min) and not user adjustable. The transducer has open collector transistor pulse output of 24VDC. The fluid passes through internal flow straighteners to stabilize turbulence, before impacting the vanned turbine rotor which rotates at a speed proportional to the flow rate. The rotor vanes have stainless steel tips, which are detected by a sensor mounted externally to the glass tube.

Features and Benefits

• Accepts reverse flow
• Works in any plane
• Negligible pressure drop
• Pressures up to 10bar
• Affordable
• Simple to install
• Factory calibrated
• Accuracy is ±2%
• Connections: 1in BSP parallel threads

Applications

• Totalising/latching applications when used with a compatible counter

Certifications

• DIN 43650

Supplied with

calibration to 2-150 l/min (NOT user adjustable).

Specificaties
Kenmerk Waarde
Maximum Flow Rate 2 → 150 L/min
Electrical Connection Cable Plug
Control Output Pulse
Supply Voltage 24 V dc
Display Screen No
Pipe Diameter Range 1 in
Minimum Operating Temperature 5°C
Maximum Operating Temperature +60°C
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
372,21
(excl. BTW)
450,37
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 372,21
Related Products
304 grade stainless steel construction, ideally suited for ...
Description:
304 grade stainless steel construction, ideally suited for use in aggressive environmentsConsists of reed switch and pivoted actuator magnetHigh temperature operation of up to 120°C0.1 / 1 m XLPE cable0.75 mn SG of liquidUser configurable N/O or N/C operation by ...
Series IR Precision Regulators are designed to be ...
Description:
Series IR Precision Regulators are designed to be compact and light weight. The maximum set pressure has been expanded from the conventional 0.7MPa to 0.8MPa. Relief flow has been increased by nearly 5 times (compared to SMC IR201, IR401).
Two wall mounting control units and adaptor mount ...
Description:
Two wall mounting control units and adaptor mount transmitter module designed to provide precise control of liquid flow quantities. Induces a measured frequency into a transducer which is proportional to the flow rate. Selectable dosage mode, overfill correction, allocation of ...
Compact switches with moving magnet reed contacts specifically ...
Description:
Compact switches with moving magnet reed contacts specifically designed for monitoring maximum/minimum flow values. The switches fit a range of connection bodies. Suitable for neutral fluids, oils, water up to +50°C as well as acidic and alkaline solutionsMechanical adjustment of ...