Key Instruments Variable Area Flow Meter, 0.4 L/min → 5 L/min, MR3000 Series

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: US
Productomschrijving
//media.rs-online.com/t_line/L198289-01.gif
//media.rs-online.com/t_line/LD198289-02.gif
//media.rs-online.com/t_line/LE198289-01.gif
//media.rs-online.com/t_line/LF198289-01.gif
//media.rs-online.com/t_line/LI198289-01.gif

Key Instruments Flow Meter

The Key Instruments MR3000 series variable area flow meter measures the gas flow rate of 0.4L/min to 5L/min. This is a high tech, moulded, low cost manufactured from high impact polycarbonate. It can operate at pressures of 100psig and temperatures of 150°F (65°C). These economically designed units provide high-quality and accuracy when installing properly. The durability of the polycarbonate allows the flow meter to provide years of trouble-free service. It is supplied with scales in LPM and SCFH for air, or CCM and GPH for water.

Inclusions:
Mounting brackets and built-in bezel.

Features and Benefits

Pipe diameter range is 1/8 in
Connection type is 1/8 NPT female
Maximum operating pressure is 6.9bar
Maximum operating temperature is 65°C
high-quality construction
10:1 turn direct reading scales
Monitor or control air and water flow
Supplied with east to read 10:1 turn direct reading scales
Fittings made of brass
Seal material is VITON W/ stainless steel

Applications

It is use with air and water
Ideally suited for OEM applications

Specificaties
Kenmerk Waarde
Media Monitored Gas
Device Type Variable Area
Minimum Flow Rate 0.4 L/min
Maximum Flow Rate 5 L/min
Pipe Diameter Range 1/8 in
Connection Type 1/8 NPT Female
Maximum Pressure 6.9bar
Material Polycarbonate
Maximum Media Temperature +65°C
Maximum Operating Temperature +65°C
Series MR3000
7 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
56 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
70,50
(excl. BTW)
85,30
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 70,50
Related Products
Calibrated flow indicator with switched output specifically designed ...
Description:
Calibrated flow indicator with switched output specifically designed for use with water. Suitable for installation in any plane. Utilises the technique of differential pressure across a piston against a calibrated spring, with the flow rate read off a scale marked ...
The EASIFLOW is a flow measuring device incorporating ...
Description:
The EASIFLOW is a flow measuring device incorporating an AC-DC switch suitable for controlling valves or pump motors or for activating alarm signals. • Oil and water calibrated • Pressures up to 10 bar • Flows from 1 L/min to ...
High-pressure, variable flow indicators with a graduated flow ...
Description:
High-pressure, variable flow indicators with a graduated flow scale on the outer viewing sleeve and an indicator ring which is magnetically coupled to an internal piston. All utilise the technique of differential pressure across a piston which, as the flow ...
For many non-corrosive, low-pressure air, water and gas ...
Description:
For many non-corrosive, low-pressure air, water and gas flow applications, it pays to use accurate instrumentation. The FR series provides highly repeatable results and is also durable and affordable.Durability is the result of precision-machined, 1 piece, acrylic-body blocks that can ...