Gems Sensors Turbine Flow Sensor, 2 L/min → 30 L/min, FT-110 Series

  • RS-stocknr. 446-8315
  • Fabrikantnummer 173940-C
  • Fabrikant Gems Sensors
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: CH
Productomschrijving

Gems Sensors Turbine Flow Sensor

The Gems Sensors FT-110 series hall effect turbine flow sensor sense a liquid flow rate of 2L/min to 30L/min. It is ideal for OEM applications involving low flow liquid monitoring. The low-cost coupled with 1/2% repeatability makes it an ideal candidate for replacing the dispensing timer system. Unlike the existing time system, turbine technology is not influenced by changes in system pressure caused by again filter. The sensor standard power and output specifications make it easy to retrofit to existing controllers.

Features and Benefits

Pipe diameter range is 3/8 in
Low-cost plus high accuracy ±3% of reading
It is available in Nylon 12 material
Required supply voltage is 5VDC to 24VDC
Connection type is 3/8 BSP
Maximum operating pressure is 200psi
Operating temperature rating ranges between -20°C and 100°C

Certifications

FDA approved

Specificaties
Kenmerk Waarde
Media Monitored Liquid
Device Type Turbine
Minimum Flow Rate 2 L/min
Maximum Flow Rate 30 L/min
Supply Voltage 5 → 24 V dc
Pipe Diameter Range 3/8 in
Connection Type 3/8 BSP
Maximum Pressure 200psi
Material Nylon 12
Minimum Operating Temperature -20°C
Maximum Operating Temperature +100°C
Series FT-110
28 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
165 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
101,55
(excl. BTW)
122,88
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 101,55
Related Products
RotorFlow® in its most basic form — a ...
Description:
RotorFlow® in its most basic form — a bright orange rotor turning with fluid flow. Simple, direct and reliable. Flow rate is estimated, or confirmed, by viewing the speed of the turning rotor. Either port can be used for incoming ...
RotorFlow® Switches build an extra level of reliability ...
Description:
RotorFlow® Switches build an extra level of reliability and protection into your equipment. By principle of operation, the rotor cannot be deceived into indicating a positive flow situation when no flow actually exists. Once set to a desired actuation point, ...
The FS-4 Series makes flow protection economical for ...
Description:
The FS-4 Series makes flow protection economical for a broad range of industrial applications such as welders, lubrication systems, medical sterilisers and laundry chemicals dispensing. • Flow Rate Settings: 0.38 LPM to 6 LPM • Port Size: 9/16"" - 18 ...
These rugged inline flow switches use 100 micron ...
Description:
These rugged inline flow switches use 100 micron filtration and are less susceptible to clogging than other high-pressure inline flow switches. The 1 piece magnetic PPS composite piston makes the FS-380 ideal for high-pressure applications such as industrial cleaning equipment. ...