RS PRO, 0.05 10 L/min Flow Transducer, Cable, Pulse, 4.5 24 V dc

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

Mini Turbine Flow Meter

The mini turbine flowmeter is designed to give high performance and competitive pricing. Its totally non-metallic wetted components make this the ideal choice for the metering of aggressive chemicals including ultra-pure water. The standard inlet tubes are barbed to accept 8mm hose sizes. The bearings are made of sapphire for long life and reliability, the body is moulded PVDF as standard and the 'O' ring seal is typically Viton®.

At the heart of the meter is a precision turbine that rotates freely on robust sapphire bearings and contains over-moulded magnets that are detected through the chamber wall by a Hall effect detector. The output is a stream of NPN/PNP pulses that are readily interfaced with a most electronic display or recording devices. This combination of materials and technology ensures a long life product with reliable operation throughout.

Features and Benefits:

• Low-cost Sapphire bearings
• Body and cap made from durable PVDF
• Over-moulded Magnets
• Viton 'O' ring seal
• Hall effect sensor
• 0.1% repeatability
• -25°C min to 125°C max
• Supplied with two metres of oil resistant, screened cable

Typical applications:

• Drink dispensing Laboratory tests
• Cooling equipment
• Active flow alarms
• Semiconductor plant

Flow Rates:

The liquid flow rate can be controlled by applying different-size jets (attached):

Note

When used in automotive applications, the formation of vapour should be minimised by fitting the transducer between the fuel pump and the carburettor, but before any pressure regulator. The device should be mounted vertically if vapour is likely to form.

//media.rs-online.com/t_line/L256225-01.gif
//media.rs-online.com/t_line/LD256225-01.gif
Specificaties
Kenmerk Waarde
Maximum Flow Rate 0.05 10 L/min
Supply Voltage 4.5 24 V dc
Pipe Diameter Range 8 mm
Minimum Operating Temperature -25°C
Maximum Operating Temperature +125°C
Current Rating 8 mA
31 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
339 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
109,56
(excl. BTW)
132,57
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 109,56
Related Products
The digital control electronics serves to operate proportional ...
Description:
The digital control electronics serves to operate proportional solenoid control valves. Plug-on control electronics with switchable signal inputConverts analogue control signal to modulated output for varying the opening of the proportional solenoid control valveCompensated for coil temperature/operating ...
Series IR Precision Regulators are designed to be ...
Description:
Series IR Precision Regulators are designed to be compact and light weight. The maximum set pressure has been expanded from the conventional 0.7MPa to 0.8MPa. Relief flow has been increased by nearly 5 times (compared to SMC IR201, IR401).
Lock speed setting, with the touch of a ...
Description:
Lock speed setting, with the touch of a buttonIt can be locked only by pushing the handle after adjustment. Convenient opening indication scaleThe opening indication scale for the needle valve is provided on the handle to facilitate speed adjustments. Easy ...
Compact switches with moving magnet reed contacts specifically ...
Description:
Compact switches with moving magnet reed contacts specifically designed for monitoring maximum/minimum flow values. The switches fit a range of connection bodies. Suitable for neutral fluids, oils, water up to +50°C as well as acidic and alkaline solutionsMechanical adjustment of ...