Flow Switch Gems Sensors FS-3

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: US
Productomschrijving

FS-3 Series Flow Switch

These ultra compact switches have been specially designed for reliable operation in clean post-filtered water. FS-3 switches are instrument quality, yet affordably priced for pure water equipment, from UV lamp switching to filter life monitoring. Also suited to some chemical applications and various cooling applications.

Features and Benefits

• 0.2 l/min - 3.8 l/min with pre-adjusted set points • Operating pressure: 10 bar at 20°C
• Inlet/Outlet ports: 1/4" NPT, R 1/4"
• Any mounting position

Product Application Information

• Electronic Equipment: Laser Heads, Welders, Power Supplies, High-Speed Spindles, X-Ray Tubes, Semiconductor Equipment • Bearings or Gears: Presses, Rotating Equipment, Conveyors, Machine Tools, Robotics
• Processing and Dispensing Equipment: Water Purifications and Filtering, X-Ray Film Processing, Beverage Dispensing, Chemical Additives, Gas Sampling, Distilling

Note

50 micron filtration is recommended

Specificaties
Kenmerk Waarde
Media Monitored Liquid
Device Type Piston
Maximum Flow Rate 2 L/min
Supply Voltage 120 → 240 V ac/dc
Pipe Diameter Range 1/4 in
Connection Type 1/4 BSP
Maximum Pressure 10bar
Material Noryl
Maximum Media Temperature +100°C
Maximum Operating Temperature +100°C
Series FS-3
8 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
59 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
43,50
(excl. BTW)
52,64
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 43,50
Related Products
The FS-4 Series makes flow protection economical for ...
Description:
The FS-4 Series makes flow protection economical for a broad range of industrial applications such as welders, lubrication systems, medical sterilisers and laundry chemicals dispensing. • Flow Rate Settings: 0.38 LPM to 6 LPM • Port Size: 9/16"" - 18 ...
This rugged inline flow switch offers the same ...
Description:
This rugged inline flow switch offers the same superior performance and resistance to clogging as its metal cousin (FS-380). The fixed set point and simple design make it a dependable switch. The FS-380P is an ideal choice for coolant applications ...
This series of precision-calibrated switches provide reliable and ...
Description:
This series of precision-calibrated switches provide reliable and consistent performance; repeatability is within 1%. FS-925 units are factory preset for actuation at specified flow rates.These switches provide accurate detection of excessive or insufficient flow rates. They protect against loss of ...
Standard FS-550 switches sense liquid flow in either ...
Description:
Standard FS-550 switches sense liquid flow in either direction to monitor flow/no-flow conditions. The paddle is trimmed during installation to permit switch actuation at the desired flow rate. As flow increases, the paddle pivots to move out of the liquid ...